Result: wheel simulator

Hi Mark, welcome back! Based on your 2021 Tiffin Phaeton 37BH on a Freightliner chassis and not the PowerGlide, the most common chassis is the Freightliner XC chassis, and for that setup the confirmed anti sway bars are the Roadmaster rear bar part…

The Fan-Tastic Vent Roof Vent w/ 12V Fan - Reversible #FV801250 will fit in the same opening as your current vent as they are industry standard size. I recommend using the Installation Kit #344270KITW to install and seal your vent. You can run wires…

Hey Phil, thanks for reaching out. We do have replacement doors for the B and B water centers. I'll need to know the dimensions of the current door so we can match that up. There are a few different options and we want to be sure you get the…

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

In order to sync the Replacement Touchscreen Remote part #LC358601 with the multi-function pad on your 2015 Keystone Cougar 327RES you are going to want to complete the following: 1) To begin syncing the remote to the receiver, both the receiver and…

We have just what you need! The replacement motor for your A-300 series Klauber slide out is the part #LC157511. The last 4 digits of the number you listed confirms that you have an A-300 series which is how I know this is the correct replacement.

The horizontal center to center bolt distance is 3-7/8 inches, with the vertical being 3-3/4 inches as shown in the provided photo. I've linked to a product description for the Valterra waste valve.

The four bolt pattern of the flange on the waste water valves is an industry standard so you don't really have to worry about measuring the bolt hole spacing. However, to address your specific question the bolt holes are spaced 3.73" apart…

Hey Bruce! The SoftStartRV Soft Start #SSR54FR is what you need for your 13K Btu Furrion Chill HE AC unit. This is a universal kit so while it won't be plug and play, it will still work with your Furrion. What's the driving force pushing you…

Tim, yes you can use both the Roadmaster Front Anti-Sway Bar #RM-1209-139 with your Safe-T-Plus blue steering control.

Yes, the High Pointe Direct Replacement EM925AQR, which is part #HP59ZR on our site, will replace your existing microwave High Point model number EM925RYS.

Hey Volker, the closest option we have is the part #HP99ZR which has cut out dimensions of 22-7/16" wide x 15-3/16" tall x 19-1/4" deep. The biggest issue would be the depth being a bit more than what you listed. Is there additional…