Result: Step Support

Upon reading all the information, I do agree with you and believe the controller to be the issue. For your Replacement Steps, Motor, and Control for Kwikee RV Electric Steps # LC3722615, the correct replacement control module is the: -Replacement Control Unit for Kwikee Electric RV Steps # LC379146. |

This is because the handrail will use mounting brackets specific to the TorkLift step design. In order to use this with the electric steps on your Holiday Rambler RV, you would likely need to extend the vertical rail down to the ground with a rubber foot. |

| The Replacement Step, Motor, and Control for Kwikee RV Electric Steps part # LC3747452 comes with the Replacement Control Unit for Kwikee Electric RV Steps part # LC379146. |

From the bottom of the ladder to the bottom of the first step on RV ladder # SP502L is approximately 10 inches. | what is the measurement from bottom of ladder where it attaches to trailer and bottom of 1st...

This would be my choice, but if there is not enough overhang, then step down to the Solera RV Slide-Out Awning - 14'1" wide with a 48" projection, # LCV000163302 for white or # LCV000168112 for black, has an actual awning rail width of 169" for a 1" overhang. |

As with any flat tow setup, make sure you check your owners manual and follow all of the steps in the recreational towing section. Do you plan to install this yourself? | I have a 2025 Ford Ranger. I want to set it up to flat...

What do you I need to make this work. My RV has 4 pin flat. | Custer Wireless LED Tow Bar Light - Weatherproof - Magnetic Base - 23inch Long - 4-Pin Round Item # LIW-LDTL I did not realize this is sold with a 4 pin round connector....

But there is not a simple plug-in wiring adapter such as the # 3026-P available. From our Tech Support contact at Tekonsha they informed us that when GM changed the wiring of the platform the Traverse is built on, the previously used wire adapter no longer works so you need to use the following parts and steps: T-One Vehicle Wiring Harness with 7-Way Trailer Connector, # 118287 Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller, # 20127 Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers, # 5506 1 |

Just make sure you follow all the steps and procedures listed in your owners manual. | I need verification on the base plate for the 2025 Ford Ranger. Does that fit the Raptor series and please verify the 2025 Ford Ranger...

I want to set it up to be towed behind RV. | Do you have a kit that will work with a 1989 ford ranger? I want to set it up to be towed behind RV. | We can help you with the items you'll need to flat tow your 1989 Ford Ranger...

Because you don't have the factory tow package, we need to take a couple steps to get us there. The first step is to see if the factory wiring for a tow package is present. | I have a 2016 Traverse without...

It is always a good idea to check the recreational towing section of your vehicles owner's manual for any special steps required to make you vehicle ready to be flat towed, and for any flat tow restrictions. | Im considering...

I have a 2013 Chevy traverse LTZ. Bought a motor home which came with a Road master Stering All Terrain tow.What is the correct base plate I need for this vehicle? Also are the base plates hard to install? | For your 2013 Chevy Traverse and...

There will be a sectional usually labeled as "Recreational Towing" that will state if your vehicle is able to be flat towed and what steps have to be followed to ensure the safety of your vehicle. | What are all of the parts...