Result: light boxes

How do you level a travel trailer or camper? How do you use leveling blocks?

Review of the type of lighting kits that can be installed on a vehicle to provide the appropriate light functions while it is being towed. It compares the benefits, features and installion methods for removable tail light kits, separate-bulb kits and diode light kits.

To legally flat tow your vehicle you must ensure that it is properly wired and connected to your RV. Your towed vehicle's signal lights must act in accordance with the brake and turn signal lights on your RV or tow vehicle. |

Learn about the five primary components you need for a safe flat towing setup: a base plate kit, tow bar, safety cables, light wiring, and a supplemental braking system.

Removable exterior light kits Magnetic towing lights Hitch-mounted light bar Separate tail light bulb kits Mounts inside vehicle's tail light housing Bypasses dinghy lighting system Diode light systems Wires in-line with dinghy's existing tail light bulbs Requires little to no maintenance after initial installation Wiring extensions Connect towed vehicle wiring to motorhome wiring Most installations require an extension Charge line kits Allows RV or motorhome to charge towed vehicle's battery while towing Connects from 6-way or 7-way plug at front of towed vehicle to it's battery Keeps towed vehicle's battery charged if that battery is used for powering a braking system A power line must be present on the RV or motorhome If power is not at the 6-way or 7-way plug on the RV or motorhome, then a charge line kit made for RVs and motorhomes must be installed For detailed information on the types of dinghy lighting available, click here. |

Find out everything that you need to know about the different types of hand winches.

Winch Accessories Pulley Blocks Double the pulling capacity of a winch Can be used to move an anchor point and keep winch cables straight To attach a pulley block to the load you are moving, run the cable from the winch, through the block and back to an attachment point close to the winch. |

How to install a trailer hitch. General information about the installation of trailer hitches on cars, trucks, and suvs including bolt-on, minor drilling, fish wire and other methods to make installing a hitch easy.

Hitch Hardware Carriage Bolts and Wrench Washers (Reinforcing Plates): Many hitches use carriage bolts and special washer blocks or plates, which act as a wrench inside a boxed-in section of the frame to hold the bolt during tightening. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2016-2018 Chevrolet Silverado 1500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

This page provides detailed instructions for installing diodes on a dinghy with a separate, 3-wire tail light wiring system, providing the dinghy with operational tail lights while being towed

Tie in the left-turn circuit from the tow vehicle wiring harness using a spade connector Attach the yellow (left-turn) wire from the converter to the remaining input prong on the diode Tape up connections to secure them Running lights: Locate factory left-side running light circuit and install diode, leaving one input prong open (temporarily hold off installing the wire from the wiring harness) Next, locate factory right-side running light circuit and install diode, again leaving one input prong open Create a jumper wire to carry the running light circuit from the left-side running light to the right-side running light Cut an extra length of wire that can extend from the left-side diode to the right-side diode Twist the loose end of the jumper wire on the left side and the brown wire from the wiring harness together and insert the twisted end into the spade connector Connect both wires to the remaining prong on the right running light diode Locate factory right-side running light circuit and insert diode Run the remaining loose end of jumper wire across and attach it to remaining prong on the input side of the right running light diode Brake lights: Locate factory left-side brake light circuit and install diode, leaving one input prong open Locate factory right-side brake light circuit and install diode, leaving one input prong open Create a jumper wire to carry the brake light circuit from the left-side brake light to the right-side brake light Cut an extra length of wire that can extend from the left-side diode to the right-side diode Twist together the loose end of the jumper wire on the left side and the red wire from the converter box and insert the twisted ends into a spade connector Connect both wires in the spade connector to the remaining prong on the right brake light diode Run the loose end of jumper wire across the back of the vehicle and attach it to remaining prong on the input side of the right brake light diode Right turn: Run a length of wire from the green wire on the output side of the converter to the right-side turn signal Connect the green wire from the output side of the converter to the extension Locate the factory right-turn circuit and install diode using process outlined in the "left turn" process Attach the end of the extension coming from the green wire on the converter to the open input prong on the right-turn diode |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2018 Ram 1500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "High-Low Adapter", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "ets-tow-bar-cover", "productName": "Tow Bar Cover", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523042.html", "partNumber": "DM9523042", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2015-2018 Chevrolet Silverado or GMC Sierra 3500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

A trailer jack lifts and supports a trailer tongue, and keeps it level when not attached to the tow vehicle. Jacks vary in capacity and features for different applications.

Basic Functions of a Trailer Jack Raises and lowers the trailer so that you can connect the coupler to and disconnect it from the ball on your hitch Keeps the trailer level when it's not attached to the tow vehicle Stabilizes the trailer for loading and unloading and when the trailer is parked Go to more information about: Trailer tongue weight and height Jacks for standard ball/bumper pull trailers RV landing gear and heavy-duty jacks Jacks to stabilize trailers Jack accessories Repair parts for jacks |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2006-2007 Chevrolet HHR behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2015-2018 Chevrolet Silverado 2500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

This page will help you understand the purpose and function of tow bar braking systems. With this information you can decide whether you need a supplemental braking system and, if so, which one is right for you.

How It Works: System connects to RV via wiring harness and activates when RV's brake lights are engaged Actuator mounts in towed vehicle, in front of the driver's seat, and the extended arm depresses brake pedal when signaled Indicator light mounts in motor home and illuminates when towed vehicle's brakes are activated Benefits: Fast, simple installation Portable design - switch between different towed cars quickly and easily Breakaway mode - set to activate only in event of breakaway Drawbacks: Non-proportional system does not offer full emergency braking Minimal adjustment limits accuracy and control System can be manually set to "light", "medium" or "heavy", with no variables in between System works with " dead pedal " only Will not work with hybrids or other vehicles that have continuous power-assist brakes Requires that you deplete the dinghy's vacuum before towing, every time To deplete vacuum, pump brake pedal repeatedly so that resistance builds up Actuator may need repositioning - box can "crawl" up seat, affecting leverage on brake pedal Roadmaster's Stop Light Switch Kits can be used to ensure proper positioning |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2011 Chevrolet HHR behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "DNH-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2015-2018 GMC Sierra 2500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-tow-bar-cover", "productName": "Tow Bar Cover", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523042.html", "partNumber": "DM9523042", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems for flat towing your 2014-2018 Jeep Cherokee behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat tow your 2010-2011 Jeep Liberty behind a motorhome.

/static/images/pics/r/m/rm-766_4.jpg", "productTitle": "Roadmaster Automatic Battery Disconnect", "checklists": [ { "text": "Lets you easily disconnect battery so vehicle can be towed behind RV"} ], }, { "productDataID": "RM-stop-light-switch", "productName": "Stop Light Switch", "productURL": "https://www.etrailer.com/Tow%20Bar%20Braking%20Systems/Roadmaster/RM-751430.html", "partNumber": "RM-751430", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2013-2014 Ram 1500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2009-2012 Smart Fortwo behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2019 Jeep Cherokee behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D2-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2005-2007 Jeep Liberty behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-rock-guard", "productName": "Sentry Deflector", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523135.html", "partNumber": "DM9523135", "productImage": ".. |

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2015 Ram 1500 behind a motorhome.

/static/images/pics/r/m/rm-076_2.jpg", "productTitle": "Roadmaster High-Low Adapters", "checklists": [ { "text": "Allows tow bar to remain level"} ], }, { "productDataID": "D-tow-bar-cover", "productName": "Tow Bar Cover", "productURL": "https://www.etrailer.com/Accessories-and-Parts/Demco-RV/DM9523042.html", "partNumber": "DM9523042", "productImage": ".. |