Result: wheel stud

Hi Larry! I see you already purchased the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH32TR for your 2024 BMW X5, but I did still want to confirm that this does include all the needed wiring for a 7-way…

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

The Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel #LHAS701 are intended for wheel bolt size 9/16-18 with an 8 on 6-1/2 inch bolt pattern. These wheels with that bolt pattern and wheel bolt size are rated for 4,805 lbs at 123…

The stepped portion of the #RG03-120 is 1 inch long but the actual splines are 1/2 inch. I apologize for the confusion.

We don't have the length of stud you are seeking. The longest 5/8 inch stud we have is 3-1/8 inches. If that length will work, I recommend the Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4) #RG03-120. These are a…

Hi Richard, I'm pretty sure they are the same thing, and the issue is mostly rounding (bear with me a second). The wheel studs that say they have a .54 generally have a .545. Technically, that should round up to .55, but not all do for one reason…

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

Hello again, Corey! We do have a wiring kit available for your 2026 BMW X5 with the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit #C56190KIT, but the Draw-Tite hitch #DT96GR does not have one that specifically has…

Hey Dewayne! Since your 2022 Vanleigh Beacon 41FLB has 8k axles I recommend the DeeMaxx Disc Brakes #DE63AR. Are you converting from electric brakes? If so, you will also need a brake line kit #HS496-252, a breakaway kit #3802308 (if you don't…

A TruRyde rvd-h-865 7k hub/drum like # AKHD-865-7-2-K uses 1/2-inch drive-in studs that are 1-5/16-inches long. For a replacement stud you can use #165981. This is slightly longer at 1-1/2-inches but it has the same 1/2-inch diameter. They are also…

Hey Jack, the Dexter Trailer Idler Hub Assembly #DX22XR is the same as the old 17214. This is designed for a 2,500 lb axle and uses a #LM67048 inner and #LM11949 outer bearing which matches the bearing dimensions you mentioned so it would be exactly…

The Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath #8-285-10UC3-A is the replacement option we have. The only difference is the wheel studs are 5/8 inches instead or the 9/16 inch wheel studs of your current hub. This comes…