Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...From what I could find it looks like your 2017 Lance model 1475 has the Dexter #10 torsion axle. If that is the case, the Torflex Lift Kit #K71-707-01 is the correct lift kit for that axle. I recommend that you verify that is the axle that you have…
view full answer...We have several options of solar panels to keep your 2021 Jayco Pinnacle's battery charged. If you're only looking to give your DC battery a little help, then I recommend the Go Power Portable 90-Watt, part #34282729. The…
view full answer...To connect an electric brake controller to your 2010 Freightliner Cascadia, I recommend you start with a proportional brake controller like the Prodigy P3 #90195. This when connected correctly will give your trailer brakes the same pressure at the…
view full answer...For a brake controller I would recommend the Prodigy P2 Brake Controller part #90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount…
view full answer...The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…
view full answer...Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to…
view full answer...There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…
view full answer...You certainly can! Installing a brake controller is fairly easy if you are familiar with running wiring. To install a brake controller like the popular Tekonsha Prodigy P3 #90195 you will need to run the wires on the pigtail to the following…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general…
view full answer...The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…
view full answer...Contact and Help