Search: wash   >   !RV Jack Pads   >   Car Wash Tools   >  

The Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2-5/16" Ball - 20,000 lbs #DM8204011 is rated to be used with brakes on 2 axles, or 4 brakes total. If all 3 of your axles have brakes, you will need to add the Demco Replacement…

When it comes to the best hydraulic actuator one of our most popular options is the Brake Actuator with Electric Lockout #099-175-20 from Dexter which has a weight capacity of 7,500 lbs. It is compatible with a 2" hitch ball and fits 3"…

You can use free-backing brake assemblies on your trailer in place of the existing non-free-backing brakes. For your 2001 EZ Loader boat trailer I recommend the Demco Hydraulic Drum Brake Assemly, Free Backing, Galvanized, for 10 Inch Brakes #40715…

It sounds like the remains of a double lip seal. Was it like a rubber o-ring with a metal spring around it? You are going to have to replace the seal so I would just disregard the sleeve. It would go on the outside of the rubber lip though. I…

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

Thank you for the photo of your vintage utility trailer's spindle. The simplest and surest way to identify a compatible trailer hub is to identify the inner and outer bearings and the grease seal it uses. Matching up those components along with…

You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…

The torque rating for both the 1-7/8 inch and 2 inch hitch balls that are included in the etrailer.com Ball Mount Kit #989900 is 250 foot-pounds.

The torque rating for both hitch balls in #989900 is 250 foot pounds.

For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and can have…

The Tow Ready 2 Inch Hitch Ball, part #63845, you have referenced needs to be torqued to 250 foot pounds. It is recommended to frequently check that the ball is tightened to these specifications. If you are meaning the mounting bolts that are used to…

Saris offers the Hitch Tite Threaded Anti-Rattle Lock, #SA3022, for use with the Saris Freedom 4 Bike Platform Rack, #SA4414B, that you mentioned. In addition, they offer the 8 Foot Long Cable Lock, #SA981, to secure your bikes and help prevent…