Replacement Control Unit for Kwikee Steps Part 094707-04-700
Step control unit. 2008 Itasca sunrise #094707-04-700 | I was able to look up part number 094707-04-700 and find the correct replacement control unit for the Kwikee steps in your motorhome. The correct part is the Replacement Control Unit...
Steering Stabilizer for 2008 Itasca Sunova Motorhome on Ford F53 Chassis
WILL THIS FIT 2008 ITASCA SUNOVA 35J | Your Ford F-53 chassis has a 20,500 GVWR, which means that the # RM-RBK22-RSSA would be the correct steering stabilizer for your 2008 Itasca Sunova Motorhome. I've linked to a product description and an...
Mounting Brackets Installing Roadmaster Steering Stabilizer On 2010 Cambria RV E-450 Chassis
I have a 2010 Itasca Cambrai 30 ft. Class C I am looking at Steering Stabilizer by roadmaster. could you help me to figure out which on to purchase. thank you .. | The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR...
Replacement Red Oval Clearance Light for Itasca Sunova Motorhome
Sae ap2-16 is the number on the lens do you have any | It sounds like you are just trying to replace an old oval clearance and if that's the case we have some great options. That said, the numbers on the lens of the light (SAE ###) are not part...
Front Floor Mat For 2012 Navion On 2011 Mercedes Sprinter 3500 Chassis For Over Floor Hump
Have a 2012 Navion built on late run 2011 MB sprinter 3500 cab and chassis. What full over the hump Weathertech product might hopefully fit it. | For your 2012 Navion on the 2011 Mercedes-Benz Sprinter 3500 chassis you will need the WeatherTech...
SnapPad Jack Pads for Itasca Meridian Motorhome
SnapPad Jack Pads for Itasca Meridian Motorhome | To obtain SnapPad Jack Pads that are a fit for your 2014 Itasca Meridian motorhome you will need to measure the size of your existing jack pads. They will probably be 10" is diameter. Measure...
RV AC Replacement for Coleman Mach Unit
Im confused, but it may not be etrailers fault. My RV currently has a Coleman Mach air conditioner that is no longer reliable so Im looking for a replacement. I talked with a rep at Coleman Mach and they said that etrailer is a distributor,...
Diameter of Output Shaft on the MaxxAir Mini Deluxe Trailer Roof Vent
Is the motor on the MaxxAir vent 3/32inch round bore or 1/8inch D-bore? | The output shaft on the fan motor within the MaxxAir Mini Deluxe Trailer Roof Vent part # MA00-03851 has a d-shape and is 1/8" diameter. |
SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F
can you please tell me the part/product number for Sumosprings, front and rear for a 2014 Itasca Sunstar 35F? | The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part # SSR-180-54-1 for the rear and part # SSF-170-40-2 for...
Replacing the Atwood GCH6A-10E
The motorhome is a 2008 Itasca Cambria 26A. The water heater is an Atwood GCH6A-10E. Dated 03/19/07 Serial 9615901016295. Although I believe the heater is capable of both electric and engine heat, these options are not installed. I assume the...
Will Ventline Replacement Damper Fit Range Hood Exhaust On 2006 Itasca Navion RV
Will this dampener fits the outside exhaust fan for My 2006 itasca navion??? | If the range hood in your 2006 Itasca is a Ventline P, B, or T Series range hood with the horizontal exhaust, then the Replacement Damper # BCA0472-00 will work great...
Replacement Steps for Kwikee Revolution Series on 2012 Itasca 30T Motorhome
I have a 2013 Itasca 30T Sunstar motorhome built by Winnebago. I have a set of electric steps by Kwikee , Revolution Series, 2 steps. I cannot read the model # that is worn off. The other day they started jerking going in or out. It looks...
How to Measure RV Frame for Draw-Tite Multi-Fit Motorhome Trailer Hitch
On Draw-Tite 5350 when it says maximum frame width 46 inches is that measured from outside to outside? or inside to inside? or center to center? Other? Thanks, | When measuring the frame width of your motorhome to ensure fitment of the Draw-Tite...
SnapPad Fits for a 2011 Itasca Ellipse 42QD with HWH Jacks
2011 Itasca Ellipse 42QD Front jacks appear to be 10, rear 22, HWH system. Looking for all 4 | Hi Barry, thanks for reaching out! For your 10" HWH plates you can use the Replacement Pad for SnapPad Jack Stand Pad System # SP64FR but you'll...
Which Timbren Kit Fits 2014 Itaska Sunstar 31ke
I have a 2014 Itaska Sunstar 31ke There are three different model numbers for the front springs offered by Timbren. What are the differences? I tow a Jeep Wrangler with a tow dolly also. Thanks | I checked with Timbren and for your 2014 Itasca...
How To Increase The Tension Of A Solera RV Window Awning Roller Tube Spring
How do you correctly adjust the spring tension? While driving In winds, my awnings will partly open and then “slap” against the sides of the rv. Or, is there a suggested mechanical restraint that can be used? | To increase the tension of your...
Recommended Replacement For A Jensen Model AWM970 RV Stereo System
I have a 2012 Itasca Sunova. It came stock with the Jensen model AWM970 stereo. Well, it was never great and now its died completely. I need to replace it, and I cant find any information on a replacement unit. I want to upgrade to something...
Replacement Puck Light for 2015 Winnebago Itasca Sunova
I have a 2015 Winnebago Itasca Sunova and need to replace some of the puck lights. I need to make sure that the replacements are the same footprint as the existing. The frosted glass lens cover of the existing units is 3 1/8inch diameter, and...
Is Wheel Masters 2-Hose Inflation Kit Compatible With Tire Pressure Monitoring System?
Will my TPMS sensors work on the WM8009 valve extenders? | Yes, the Wheel Masters 2-Hose Inflation Kit # WM8009 is absolutely compatible with your tire pressure monitoring system (TPMS). This kit will work with inner tires on 16", 16-1/2" and...
Sway Bar Recommendation for 2013 Itasca Meridian 34b Motorhome
Does Roadmaster make front and rear anti-sway bars for a 2013 Itasca Meridian 34b Class A Motorhome, and would you recommend them? Thank you, | For your 2013 Itasca Meridian 34b Class A Motorhome which is built on a 2013 Freightliner XC chassis...
What is Length of Camco RV Step Cover part # CAM42935
What the length of the 23 in step cover | The length of the Camco RV Step Cover part # CAM42935 that you referenced is 21-1/2 inches and fits most standard RV step dimensions. |
Can SnapRing TireSavers Tire Covers # ST7000WH Fold Up for Storage When Not in Use
Do these collapse and fold so they can be stored in an RV bin or must I put them in the garage when not in use? | The SnapRing TireSavers Tire Covers # ST7000WH that you referenced is made of vinyl which can easily collapse and fold for storage...
Kwikee Steps On Itasca Navion IQ Will Not Stop Once Retracted
2009 Itasca Navion IQ Two problems noted on my last RV trip. First symptom, steps didnt always auto retract. Second, step motor continues to run when the steps are fully retracted after closing the door. I assume its the controller. On...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
Filter Your Search
Contact and Help