Will the Gen-Y Gooseneck Coupler Work With a Recessed Gooseneck Hitch
What is the rotational clearance needed on a well style or hidden ball hitch. We have a Knaphiede bed installed on a 2017 F350 | I do have an option for you but the Gen-Y Gooseneck Coupler part # 325-GH-7002 is not going to work with a recessed...
GEN-Y Cushioned Ball Mount Recommendation that Fits 3 inch Trailer Hitch
Have you got this in 3 in | Yes, we do have a cushioned Gen-Y adjustable ball mount that fits a 3 inch hitch. For that you'd want the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1824. This has a 21k capacity, can do a drop of up...
Solution to Use Gen-Y Torsion Weight Distribution Shank with Equalizer WD System on 2017 Ford F-250
Will Equalizer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW EQ37141ET work with Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers 325-GH-1125 and Gen-Y Weight Distribution Shank 325-GH-0352? | Yes. The...
Can a Gen-Y Hitch Torsion Ball Mount be Used with a 2017 Ford F-450 with a Kelderman Bumper
I have a 2017 F450 with a Kelderman rear bumper and i want to use the 3 Gen-Y Torsion hitch with 6 /rise. The Kelderman bumper sticks out a bit of the hitch so i want to understand from the pin how far out before the assembly starts? I want...
Which Pin Box Is Better At Absorbing Chucking The Gen-Y Pin Box Or Curt Flex Air
I have a RotaFlex pin box on my 2017 Vanleigh Vilano 325RL and the rubber cushion has come out. I’m looking to replace that pin box with a Gen-Y pin box or a FlexAir pin box from Curt or Lippert. How would you compare the two and which would...
What Diameter Hitch Pin Does Gen-Y Glyder Ball Mount # 325-GH-12001 Use
Where on your site can I find the correct hitch pin diameter for the Gen-Y Glyder with 2inch ? is it 5/8th or 1/2? | The Gen-Y Glyder for 2 inch hitches part # 325-GH-12001 that you referenced is designed to be used with a 5/8 inch hitch pin...
Dimensions of Gen-Y Gooseneck Coupler w/ Torsion # 325-GH-7061
I have a recessed ball on a flatbed, opening is only so large. Can you provide me with all the dimensions so i can see if it will fit in my opening? Do they make one with more down pressure? I have a 2017 F450 with trailer capacity of 41 GCWR,...
Is There a B&W Tow & Stow For 3 Inch Hitch With 21,000 lb Capacity
Im looking for the b and w stow and go 3 pintle hitch. I cant seem to find it. I have a 3 reciever and I need the 21k capacity that it affords. | So there is a B&W Tow & Stow that fits a 3 inch hitch and has a capacity up to 21,000 lbs, but...
Weight of the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-624
How much does this adjustable ball mount weigh? | The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-624 has a shipping weight of 60 lbs. If you remove a few pounds for the shipping materials then that brings the product weight...
Correct Gen-Y 5th Wheel to Gooseneck Pin Box for 2011 Cedar Creek 5th Wheel
I have a 2011 Cedar Creek Fifth Wheel I want to change it to a gooseneck not sure the right one to buy it as a lippert on it LCI number is 2474062 | I reached out to Lippert and unfortunately the number you provided does not correspond to anything...
How to Determine 5th Wheel to Gooseneck Pin Box For 2020 Keystone Hideout
Recommended 5th Wheel To Gooseneck Pin Box For A 2020 Keystone Hideout 308BHDS? | I can help you determine which 5th wheel to gooseneck pin box you need for your 2020 Keystone Hideout 308BHDS, though we don't have a way of knowing off-hand which...
Is Gen-Y Torsion Ball Mount Compatible With Equal-i-zer Weight Distribution Systems?
I was wondering if the gen-y torsion hitch could work with a sway control hitch like the equalizer or something similar. I have a 2017 Ford F250 4x4 diesel w/camper package and will be towing a 2018 airstream classic 30. | Yes, you can use a...
Is Stabilizer Bar Kit # 325-GH-0100 Needed When Using the Gen-Y Adjustable Receiver # 325-GH-316
I am really confused..... I have an Acme EZE tow vehicle dolly and 2017 Fleetwood Bounder Motor Home. I plan to tow a 2006 Chrysler Sebring. Acme advised me to have a 12 inch off the ground hitch ball to tow the dolly/car with. That would...
Will Gen-Y Stacked Receivers Allow 2017 Ford F-250 to Tow Landscape Trailer and Mount Debris Loader
I am looking for a way to mount a debris loader while still being able to tow a small landscape trailer. Would this hitch allow me to mount a 2inch hitch mount for a debris loader in the top position while using the lowest to tow a 10' landscape...
Recommended Weight Distribution Hitch With Gen-Y Stacked Receivers 1300 Pounds Tongue Weight
I bought this and need a sway bar Do u sell a sway bar set up. Weight distribution with sway 1300 pounds tong weight more if water tanks 100 gallon are filled towing a 38 ft camper | I recommend the # EQ64FR Equal-i-zer Weight Distribution System...
Recommendations For Towing Camper Trailer and Carrying Bike Rack At The Same Time
Hello, Looking for a dual receiver where I can add 350lb in top receiver bike rack and bikes and tow a 4500lb to 5000lb camper fully loaded. I saw the experts answer about the Curt receiver and ball that would work. However, my application...
Recommended Ball Mount for 2-1/2 Inch Trailer Hitch With Long Shank and 10 Inch Drop
Hello, I am looking for a 2 1/2” adjustable ball mount that has 8-10” drop , and about 12” from pin hole to ball. Most of the products do not have the shaft length, and appear to be very short. What product would fit this? Thanks! | The best...
Recommended Gen-Y Torsion Hitch For 2018 Ford F-250 Super Duty
Hi I’m going to buy a Ford F-250 2018 and need a hitch for a boat. The trailer and boat weigh about 9-10k lbs depending on gear. I am looking at the gen y torsion hitch. I think I will need around a 5-7” drop . So I think the 2.5” hitch...
Best Way To Carry a Canoe On a 2017 Ford F-150
Greetings, I’m looking for a rack to haul a canoe on my 2017 ford f150 with a 5 1/2 bed. We have a roll up lund tonneau cover. Do you have any recommendations? Thanks in advance. | The best way to secure a canoe on a 2017 Ford F-150 is on the...
How to Gain More Height Clearance for Towing a Trailer and Using the Swagman Trailhead
I purchased the Curt dual hitch receiver D210, it works great with the Swagman Trailhead 4-Bike Rack for 2" Hitches but I need a couple more inches of rise. We use this configuration to tow a boat and the bike rack at the same time and the back...
What Does the End of the Gen-Y Hitch Aluminum Loading Ramp Look Like
This product description says hybrid hook and plate end. The product picture shows hook end. Can you please confirm the ends of this product? | I attached a picture that shows what the end of the Gen-Y Hitch Aluminum Loading Ramps # 325-GH-R84...
Minimum Tongue Weight for Shock Absorption of Gen-Y Ball Mount to Work
I have a 2017 Ford F-250 and I pull a 2012 jayco white hawk camper. The tongue weight of the camper is 750 or so lbs. In the write up about this hitch it says a minimum of 1200 lbs of tongue weight is needed to get the shock absorbing aspect...
Will Offset Ford OEM Puck Gen-Y Hitch Gooseneck Trailer Hitch Lighten Front Axle of Tow Vehicle
My axle is approx 2 1/2 inches behind my ball. Would this move the pin weight behind the axle by 2 1/2 inches compromising stability and lightening the weight on front axle? Thanks | Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford...
Can Gen-Y Hitch Torsion Ball Mount be Used with an Equal-i-Zer Weight Distribution System
I tow an Airstream Classic 30 with a F250 and an Equalizer WD hitch. The Gen-Y Torsion hitch looks interesting. Is it compatible with the Equalizer? | I verified with Gen-Y hitch that their torsion ball mounts, like part # 325-GH-1225, can...
Filter Your Search
Contact and Help