Ford  x   >   2017  x   >   !Classic Accessories  x   >   !2015  x   >   1981  x   >   Fastway  x   >  

want to buy flash e series adj ball hitch fa42002825. | We carry the Flash E-Series HD Ball Mount part # FA42-00-2825 that you referenced. This is an adjustable ball mount that can do either 8 inches of rise or drop designed for 2-1/2 inch...

We purchased a Steal Shield trailer coupler cover/ lock for our trailer. It has been damaged and we would like to replace it as well as purchase an additional unit for another trailer, both keyed alike. Is this product still available? If not,...

Will Item # BD580402 work on the new F250 three inch receiver hitches? If not, what do you have that will? | The lock you mentioned is designed for 2 inch trailer hitch receivers so it will not fit on your 2017 Ford F-250 with the 3 inch receiver. For...

Good morning. I have a 2018 Keystone Crossfire Bullet 1800RB, that I want to pull with my 2017 Ford Explorer equipped with the factory Class III hitch set up. Can you recommend a weight distribution hitch with sway control that I can back...

want to know if you folks have the anderson rapid hitch sku 3422-25 | I do have an option for you as we currently only carry the 2" Shank # AM3422 and not the 2-1/2" shank 3422-25 for the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount...

The description of this item is a little confusing to me. I own a Lance 1685 that I tow with a 2017 F150, and in my last trip I measured 750 lbs of tongue weight full fresh water and 2 full propane tanks. I have the E2 WDH, and WDH bar says...

What stays attached to the truck and what stays on trailer ? Do you have to disassemble the whole thing to unhook ? I dont get it. Basically what do I have to do each time I unhook or hook up ? | In regards to the Fastway e2 Weight Distribution...

I have a 2017 Ford F150 Lariat Super crew. The hitch is rated for 500 and 5000 without a weight distribution hitch and 1100 and 11,000 with weight distribution. At the time I purchased the hitch I understood the TW of the boat trailer I purchased...

I have a Ford F250 super duty truck with a pop up camper. The camper fits in the bed of the truck -flush with the end of the bed. Tailgate is removed. The receiver is 2.5 inch with the pin holes about 1.5-2 inches from end of receiver. ...

Hello, I have a 2017 f150 super crew 4wd that I’m using to tow a 33ft travel trailer. Weight is around 8000lb with tongue weight about 850. I have the E2 trunnion style WD system rate for 10k I purchased 10k because it said it was also good...

My 2017 F150 is 6” lifted. Can I use flash FA49-00-5900 to tow. I really like how it looks. | TheFlash Solid Steel Adjustable 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise - 12K # FA49-00-5900 would be an excellent choice for an adjustable ball...

I have a 2107 Ford F-250 Super Duty Pick Up. It comes with a oversized hitch but includes a reducer to make it compatible to 2inch hitches. Is the locking pin long enough to go the hitch and reducer? Frequently I run into this problem. |...

Will this fit a Hopkins breakaway controller? | The only replacement pin I can recommend for a Hopkins breakaway kit is the part # HM20012. If you wanted the coiled design of the Fastway kit you'd need to replace the switch too with the part...

Hi....looking to tow a 2317 Rockwood with a ford flex ecoboost. Dry hitch weight of 300 and trailer is 2800lbs dry. Ive been told the 450 from local dealers but its advised on etrailer with similar specs that the 600 is the way to go....

I have a DM14976-52 and am interested in a coupler lock. I know that there are bolt trailer coupler locks, however I would prefer a coupler lock that would be similar to BLTL-20. Thank you | The most similar coupler lock we have to the # BLTL-20...

Deadbolt locking pin rh5 xl - Do they offer these keyed alike pins in different lengths? I have a fastway e series flash drawbar with a 2 1/2” shaft for 2017 Ford F-250. The pin for the ballholder needs to be longer. 4 1/2” gap I believe If...

I have a Roadmaster 9100 braking system on my 2017 F150. I want to install a breakaway switch. I have the cylinder and just need the switch and cable. Would part # FA80-00-2060 work? Thanks. | If you have the rest of the breakaway system...

My new camper has a tongue wt. of 530 lbs and trailer wt. of 5000 lbs. cargo capacity of 1683 lbs. what size Fastway e2 hitch do I need ? | The best way to choose the correct Fastway e2 Weight Distribution System is to take the GVWR of the trailer...

I have a 33ft camper that weighs 9000lb with a tongue weight of 900lb. Would the Fastway E2 be sufficient or is the camper to long and I need the Equalizer of the same weight rating? | It really comes down to how much sway you are expecting...

If I order more than one of these will they be keyed alike? I do not see an option for keyed alike on the page. | Yes the Fastway Universal Coupler Lock # FA86-0015-309 are going to be keyed alike. This will be keyed to the Fastway Key # FA-KEY-309...

Do you have anything to help for a 2 wd application 2017 Expedition EL. Towing a 6700 lb . trailer | I may have a solution to help with the sag you're experiencing on the rear of your 2017 Ford Expedition with 2wd while towing, but there is...

I have a Fastway e2 14000 lb. Hitch. The round spring bars are only rated to 10000 lbs is this a mismatched system? | It looks like that capacity is for the shank so it's highly likely that the shank that originally came with the system didn't...

Can I use a 2 inch hitch ball with fast way e2 92-00-0800. If yes, what ball do you recommend. Thank you | Yes, the Fastway e2 Weight Distribution # FA92-00-0800 can use a 2" ball. The only requirement is that it has a 1-1/4" diameter shank...

What is the length of the 2 inch receiver to hitch? I have a typical 8inch rise curt now and need a 10inch rise to level trailer are they the same length? | The distance from the hitch pin hole of the Flash Solid Steel Adjustable Ball Mount...