!Pleasure Way x > 400 x > Salem LE TT Toy Hauler x > Malibu x >

Parts Needed to Flat Tow 2015 Chevy Malibu LS

I am looking at a 2015 Malibu LS to use as a toad, since I understand it can be flat towed in neutral, to pull behind multiple RV’s as a drive-away driver. What do I need to achieve towing? I’ve been looking up what I might need an like the...

Should the Power Wire for the Curt # C56387 be routed Inside or Outside on a 2018 Chevy Malibu

Do I run the power lead to the battery thru the inside or outside. | Typically the power wire for a wiring harness like the T-Connector # C56387 that you are installing on your 2018 Chevrolet Malibu is routed outside and under the vehicle. If...

Recommended Base Plate 2018 Chevy Malibu LT

I have a 2018 Chevy Malibu LT and I am trying to figure out if I should get a direct connect base plate or one with a cross bar. Do you have any recommendations for my car? Currently I am thinking about RM-523186-5. | Vehicles that require...

Length of Rhino Rack Crossbars for 2013 Chevy Malibu

The recommended bar is 1260 mm or about 49inch in length DS126B. I have a Thule system on my 2007 Chevy Malibu with a bar of this length. However, my 2013 Malibu is a couple inches wider so I am concerned that there might not be enough overhang...

Length of Blue Ox BX88273 Fuse Bypass Switch Wiring Harness

What's the length of the # BX88273 fuse bypass harness? | The wiring harness used on the Blue Ox # BX88273 Fuse Bypass switch is 13-1/2 inches long. I've linked to the installation instructions for you, just click the provided link to see them. |

Recommended Trailer Hitch Receiver and Wiring for Towing With 2016 Chevrolet Malibu

I would like to purchase a trailer hitch for my 2016 Chevy Malibu. I need it for towing a trailer that I would likely rent from Uhaul. Do your wire kits plug into a Uhaul trailer? I just want to make sure I have working brake lights/turn signals...

Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate

Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...

Availability of Black Version of Westin Fey Bumper 20002-92400

Can I get this bumper in black for my Ramcharger? | We have a black version of the Westin Fey bumper you mentioned with the part # 20000-92400. |

Availability of Chrome Version of Westin Fey Bumper 20000-92500

Is this available in a silver of chrome finish? Thanks! | Yes we have a chrome version of the Westin Fey bumper you referenced with the part # 21000-92500 which fits the same trucks: 1967 - 1972 Chevrolet C/K Series Pickup 1967 - 1972 GMC...

How to Get Bolts into 2002 Chevy Malibu Frame to Install Hitch

The drawing for my hitch shows the frame as U-shaped. Well ,it is but the trunk pan sits directly on top the the U. How do I get the shims and bolts in the frame without drilling huge holes in it? | To get the install hardware into the frame...

Can Hopkins Custom Tail Light Wiring be Used along with a T-One Harness on a 2010 Chevy Malibu

I recently purchased a tow hitch and wiring kit for my 2010 Malibu from your company. I also use this vehicle as a Tow Vehicle for our motorhome. I am interested in purchasing the Tow Daddy Tail Light kit which you sell, but am wondering if...

Hitch Bike Rack Recommendation for a 2016 Chevy Malibu

I have a 2016 Chevy Malibu and I have had a Cequent 1 1/4inch hitch installed, in anticipation of purchasing a quality bike rack. I likely will only ever be carrying one or two bikes. Recommendations? Thank you very much. | For your 2016...

Will Blue Ox KarGard BX8870 Fit Blue Ox Aladdin Tow Bar and Roadmaster EZ4 Base Plates

I tow a 2015 Chevy Malibu that has a Roadmaster mounting kit 523183-4 and the tow bar is Blue OX Aladdin. I want to get protection for my tow car so I am looking at the KarGard BX8870. Will it fit my equipment and are these parts comparable?...

Rear Fascia Removal for Hitch Installation on New Body 2016 Chevy Malibu

Greetings from Myrtle Beach! I have a 2016 Malibu LT new body style, not a Malibu Limited. Im a retired tech, but not body tech. I see that the rear fascia has to be removed to install the hitch, my question is after the listed bolts and screws...

Does Bolt Leader Come with Hardware Package in Curt C12051

Hello Im am looing at the Curt class 2 reciever, for my 2010 chevy malibu and does the bolt snake tool to feed the bolt from the back side, does it come with one of those or do i buy it separate? This installation looks like it will be impossible...

Installation of Roadmaster EZ Base Plates for a 2006 Chevy Malibu

2006 chev malibu ,does it have square hole in frame ? | If you are talking about the shape of the removable arms on base plate kit # 523120-1, they have a shank that is round. If you are talking about the frame on a 2006 Chevy Malibu then take...

Recommended Kayak Rack That Can Hold At Least 3 Kayaks On A 2013 Hyundai Accent SE

I have a 2013 Hyundai Accent SE and need a roof kayak rack that can hold three kayaks. Whatcha got? | For your 2013 Hyundai Accent SE I recommend the: -Thule The Stacker # TH830. This kayak holder can support up to 4 kayaks, has a weight capacity...

Is the Fishwire/Bolt Puller Included with the Curt Hitch # C12272

Does the wire bolt puller/fish wire come with the kit? | I spoke with my contact at Curt and he informed me that there is an included fishwire with the # C12272 Curt Hitch. It will be included in the bag that also has the installation instructions. I...