bing tracking image

R-Class  x   >   Rabbit Pickup  x   >   RVR  x   >   Tribute  x   >  

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Does DG52720PB Come in Chrome

I’m looking for a rear light that is 10” x 4” , do to show or can direct me in the right direction, also does this “ DG52720PB- LED Trailer Light w/ Reflector - Brake, Tail, Turn - Surface Mount - Rectangular - Red “ come chrome | Hey Sam! Great...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel

I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...

Can a Taillight Converter Module Go Bad After Working Properly for Months

Is it possible for the Circuit Protected Modulite Powered Taillight Converter to go bad? I installed this several months ago and now it does not work. Using a test light, all circuits work beforeinch the converter, but nothing works afterinch...

Trailer Wiring Recommendation for 2006 Mazda Tribute That Doesn't Require Finding Relay Location

I saw on a post it said the relay would have to be installed in a block behind the dash please explain | While I have a much easier trailer wiring solution than the # 40455 that you referenced for your 2006 Mazda Tribute there is a good chance...

Tow Bar for 1981 Volkswagen Rabbit Pickup

What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...

Recommended 4-Way Wiring Harness and Connector for a 2005 Mazda Tribute

I have a 2005 Mazda Tribute with a 4-pin harness plug that has a rubber sleeve that mounts into a metal bracket. The plug is intermittent, and I need to replace it. I can send a photo of the plug. I want to know if you have this type of...

Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103

do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...

Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer

Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...

How To Wire 6-Way Square Connector on 2000 Viking Popup to 2001 Mazda Tribute With 4-Way Flat

Is there a ready made connecting harness between 2000 Viking popup 6-Way square and 2001 Mazda Tribute 4-Way flat? I do not need anything other than lights so the six way is not necessary. Thanks. | I do have a few solutions to wire your 2000...

Which Fuse of 2005 Mazda Tribute with Tow Package for Activating Circuits

I have a 05 Mazda tribute with the towing go plug in need to know what fuse I need to make it work or relay and where does it go in fuse box | From customers we've learned that the fuse slot number 1 is the one associated with activating the...

Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103

I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....

Trailer Hitch for a 2012 Mercedes R350 BlueTec

Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...

Replacement Top Channel Cover For Thule Aeroblade Load Bars

I see the replacement strip for the Aeroblade is listed at only 59. Is there a different part number for the ARB60? | The Replacement Top Channel Cover for Thule AeroBlade Load Bars - 59" Long - Qty 1, # 852-5402-005 is the correct part for...

Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103

Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI

Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...

Trailer Wiring Harness for a 2008 Mazda Tribute without Factory Tow Package

Have bought your 118251 only to find my car does not have relays and is not wired for relays. Can I buy the other parts I need to make my 1 18251 into your 118551 Thanks | If your 2008 Mazda Tribute did not come with the factory tow package...

Availability of Hitch for 2006 Mercedes R500

Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...

How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer

I HAVE A 1979 AVION TRAVEL TRALER WITH 4 SEPERATE AXELS. THE SPINDEL IS BENT ON THE RIGHT FRONT AXEL, THEREFOR WEARING MY TIRE DOWN WITHIN 3,000 MILES. DO YOU HAVE ANY IDEA WERE I MIGHT PURCHASE AN AXEL? THANK YOU | In order to determine which...

Will the Thule Pulse XL Roof Cargo Box Fit on the Factory Crossbars on a 2011 Mercedes R350

Hi, I am planning to purchase the Mercedes Benz Basic Roof Rackinch for my 2011 R350. I would like a roof cargo carrier that will work with the Mercedes Benz rack. Will this box fit on the MB Basic Roof Rack?inch The MB Roof Rack has a channel...

Roof Rack for 2005 Mazda Tribute With Raised Side Rails for Rooftop Tent

Hello. I have a Mazda Tribute 2005 and i would like to put a roof tent in there. I only have the original racks and i dont know if changing them would be ok or i would be still on risk? Another company told me even changing them is not safe... Thank...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Filter Your Search