bing tracking image

Rodeo  x   >   Rabbit Pickup  x   >   R-Class  x   >   Ion  x   >  

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Tow Bar for 1981 Volkswagen Rabbit Pickup

What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...

How to Carry Ebike With 2006 Saturn Ion

I need an e-bike carrier that will attach to a 06 Saturn ion Im looking for a trunk mount to hold one e-bike thank you | Hello Michael, I'm sorry to say that trunk-mounted bike racks do not have the capability of carrying an electric bike;...

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel

I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...

Are There Bearing Buddy Bearing Protector Grease Caps Compatible with Harbor Freight Utility Trailer

bearing buddies for harbor freight utility trailer Is there a product available that will replace a 2inch dust cap? Bearing buddies run 2.047 and 1.98. Neither of these sizes fit my trailer. The 1.98 fell right out and I pounded on the 2.047...

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103

do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...

Installing an Inno Roof Rack on a 2007 Saturn Ion

how does the roof rack secure to roof of saturn ion 4door? do the plastic trim pieces need to be removed andreinstalled,or do the clamps secure to trim,to lock feet to roof? | The Inno Roof Rack with bar part # INB127 will install its clamps...

Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer

Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...

Replacement Grease Seal Number for Dexter 8-257 Drum Hub

Looking for grease seal part number for dexter 8-257 drum hub | The Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2 # 8-257-5UC3 will use a # 10-9 seal that is 1.5 inches inner diameter and 1.987 inches outer diameter. Crossreference...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

Installation of Curt Trailer Hitch Receiver on a 2005 Saturn Ion

According to your website, your Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4, Item # C11447 is confirmed to Fit my 2005 Saturn Ion. Your video shows it being installed on a 2007 Saturn Ion. Are there any differences between the...

Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103

I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....

Trailer Hitch for a 2012 Mercedes R350 BlueTec

Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...

Parts Needed to Flat Tow a 2006 Saturn Ion Behind a Motor Home

Im considering purchasing a Saturn Ion Quad Coupe, 2.2L 4 cyl to tow behind my motorhome, providing if it can be flat towed? | To determine if your specific 2006 Saturn Ion can be flat towed behind a motor home, the first thing you are going...

Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

How to Flat-Tow a 2004 Saturn Ion Behind a Pickup Truck

What do I need to tow tow bar 2004 Saturn Ion with mid. so. truck that has no connection for lights under back of pick up. We would be ussing a tow bar. | I am not sure what you mean by "mid" but the only 2004 Saturn Ion that can be flat-towed...

Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103

Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...

Can i Carry A Kayak On The Roof Of My 2007 Saturn Ion

My Saturn does not have a Built on roof rack, do you sell a roof rack that can be clamped to the frame of my roof and can be locked so I can use the TH898 assist lift? Thank you | I will be able to get you setup with with a roof rack for your...

Recommended Components For Flat-Towing 2007 Saturn Ion

Id like to flat tow my 07 Saturn Ion behind my 2004 Chevy Suburban. Could not figure out which towbar set up I need thanks in advance. | From my research, I found that the Ion can be flat-towed if it is not the Red Line model. When flat-towing...

Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D

Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...

Wiring a 2005 Saturn Ion for Towing a Trailer

I got a trailer and I did the wireing for the lights and every think works except the braik lights what am I doing wrong ?? Thanks . | The first thing you will need to do is make sure you have the correct trailer wiring harness that fits your...

Filter Your Search