Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
What is Required to Install the SuperSprings Custom Suspension Stabilizer Kit Part # SSA28
does this need to be installed by a mechanics shop? does the truck have to be on a lift to install with the wheels off? | The SuperSprings Custom Suspension Stabilizer Kit, part # SSA28, can be installed by a professional or by a person with...
Trailer Wiring Harness for a 2013 Nissan NV1500 Van
how do you install a NV200 wiring kit onto a 2013 Nissan NV1500 Van? | The trailer wiring harness # 118597 will only fit the 2013 Nissan NV200. It will not fit the 2013 Nissan NV1500. For the NV1500 Hopkins has harness # 46365 as a fit for the...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch
Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Can You Use the CHMSL Fuse to Power the Red Wire on a Brake Controller for a 2012 Nissan NV 3500HD
is there a fuse box for the brake lights on a 2012 3500 hd nissan | There is going to be a stop light fuse and/or CHMSL fuse on a given vehicle. Looking at pictures of the Nissan NV it does appear to have a CHMSL (center high mount stop light)...
Roof Rack Recommendation for a 2009 Volkswagen Rabbit 3-Door Hatchback
Will the Sport Rack SR1010 fit my VW Rabbit 3 Door? | The SportRack roof rack # SR1010 is not listed as a fit for the 2009 Volkswagen Rabbit 3-door but we do have several roof racks that will fit. I have included a link to them for you. The...
Hitch and Bike Rack Recommendation for a 2009 Volkswagen Rabbit
Hello Looking for bike rack. Drive 2009 VW rabbit. Want simple rack, easy use, no scratch car, two adult bikes 1 womens. Thinking of getting hitch. Sort of new to biking. Dont want to spend a ton of money, but also dont want to worry about...
Parts Needed to Install a Brake Controller in a 2012 Nissan NV
Hi I have a 2012 Nissan NV 2500 V8 SV cargo van. Looking for the plug and play adapter for the tekonsha brake controllers. Is this 3050P the correct adapter? | I wish there was a plug and play harness that would allow you to install a Tekonsha...
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
Will a Roof Rack from a 2015 Volkswagen Golf Fit a 2008 Volkswagen Rabbit
Im looking to buy a second-hand roof rack for a good price for my 2008 VW Rabbit. The rack Im looking at is a craigslist ad for a 2015 VW Golf. Would this rack be compatible with my rabbit? | The 2008 VW Rabbit and the 2015 VW Golf do not use...
Clarification of Installation Instructions for Trailer Wiring Harness # 118553 for a 2012 Nissan NV
The yellow fuse holder has the ring connector attached to the + side of the battery and the other side connected to the black wire going back to the T connector module power wire if I am right. What is the little other square thing with the...
Roof Rack for 2007 Volkswagen Rabbit
I have a 2007 VW Rabbit 2door, and need new Yakima Q clips. Ive seen different requirements on different sites. Some say all 4 Q102 clips and others say half should be Q102, and the other half another kind of clip forgot which one. I Just want...
Why Does Curt Require a Stabilizer Strap But Other Hitch Companies Dont
Why does the Curt hitch require a strap but Draw Tite and Hidden Hitch do not?Is the Curt weaker or less stable? | Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps...
Trailer Wiring Harness Recommendation for a 2012 Nissan 1500 NV Van
Where do I run the wires from the vehicle to the connector and which color wires go to the brake lights, the tail lights and the running lights? | Actually installing a 4-way trailer connector will be a little more involved than just wire a...
Is Fascia Trimming Required to InstallCurt Trailer Hitch C11074 on a 2008 Volkswagen Rabbit
Installation instructions for this part Curt Trailer hitch indicate that minor fascia trimming is required for installation on a 2008 VW Rabbit. Can you tell me just how much trimming is actually required and if a non-professional will be capable...
Trailer Hitch, Wiring and Ball Mount for 2008 VW Rabbit
need to buy a motorcycle trailer hitch and required accessories. Renting motorcycle trailer from UHaul. I have a 2008 Volkswagen rabbit | For your 2008 VW Rabbit the Curt # C11074 is a fit and is a Class I hitch with a 1-1/4" receiver that...
Filter Your Search
Contact and Help