bing tracking image

Rabbit Pickup  x   >   R350  x   >   RST  x   >   Cube  x   >  

Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch

I am 81 years old. I have a Sun bike which I love to ride but I’m tired of riding just the streets in my small town and want to drive to other locations to ride plus some bike trails. I am not very strong so need a rack I can put on the car...

Does Curt Trailer Hitch for 2010 Nissan Cube Require Stabilizing Strap for Bike Rack

Hello, Im looking at the Curt hitch for my 2010 Nissan cube. The Curt info says it requires a stabilizing strap for bike racks. Is that correct? My Cube has a rear spoiler that prevents an attachment point for a stabilizing strap, so the...

Looking for Hitch Solution for 2004 Monaco Dynasty Coach

Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...

Tow Bar for 1981 Volkswagen Rabbit Pickup

What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...

Installation of Yakima HangOut 2 for 2012 Nissan Cube

On a Yakima Hangout 2 how far apart should the arms that touch the care be on a 2012 Nissan Cube and where do you measure from | Hi David; Yakima lists the HangOut 2 # Y02637 measurement as 16-7/8" for the 2012 Nissan Cube. You measure from...

Will Saris Solo Bike Carrier Fit 2012 Nissan Cube Carrying 2015 Surly Pugsley

I have 2015 Surly Pugsley that weighs 33lbs13oz going on a 2012 Nissan Cube.Will the Saris Solo work for me? | Hi David; the Saris Solo Bike Carrier # SA102 is a confirmed fit for your 2012 Nissan Cube. Since your 2015 Surly Pugsley weighs less...

Can a 5th Wheel Trailer with Sidewinder by Towed with No Wedge or Lock Out Bolts Installed

I have been working with Reese on questions about the Airborne Sidewinder pin box. Hopefully your tech department can help. we had this pinbox installed at the Northwood factory Arctic Fox and it was pulled 1300 miles to us. Its the first one...

Curt Hitch C11202 for a 2010 Nissan Cube to Carry a Bike Rack

I need a hitch. I’m planning to carry A electric recumbent trike.. I converted my old steel carrier Into a trike capable carrier. 1. Which option is easier to install 2. The carrier plus the trike will weight between 60-100lbs 3. Will...

Trailer Hitch Installation on a 2009 Nissan Cube with Ground Effects

My model has the ground effects kit like the chrome model. Will this fit? Also, bought a 3 bike rack to slide into receiver. Do I need the pin to take it in and out when not in use? It will do 2inch and 1 1/4. | We do have trailer hitch options...

How Does Breakaway Function Work With Wireless Brake Controller

If using wireless trailer brakes, how does this sytem handle breakaway function. Do you not have to have the capability of breaks holding for 45 min in case of a disconnection? | When using a wireless brake controller like the Curt Echo Wireless...

Trailer Hitch and Wiring Recommendation for a 2006 Mercedes R350

I am trying to find a hitch AND a wiring harness for our camper to be towed by our 2006 Mercedes R350. I found a hitch on your site but I dont know what is needed for wiring as the 2006 R-Class did not come with camper wiring pre-installed....

Dimensions of the Curt Spyder Gooseneck Trailer Hitch # 16085

Where can I locate the spec.measerment on this product? | Curt does not usually provide their product drawings or spec diagrams for their products, but, if you were looking for a specific dimension on the Curt Spyder Gooseneck Trailer Hitch,...

Identifying Wiring on 2010 Nissan Cube for Installation of Curt Tail Light Converter # C56175

Im trying to find out what color wires on my 2010 nissan cube matches the colors on the hitch hookup I bought. The colors on car are differant. Left turn, right turn stop. Thank you | Often vehicle wiring colors are consistent to allow color-for-color...

Could Scissor Jack be Used on Motorhome

I have a Class A 38’ motor home. Has hydraulic leveling jacks. One is broke and another one failing very soon it appears. Had an idea to just keep all of them in up position and use scissor jacks to level and stable rv. Cheaper then repairing...

Difficulty Removing Old Relay For Towing Package On 2010 Nissan Cube

Whats the easiest way to remove the old relay? Wont budge. | Typically, you can just pull the relays out. From my research I read that they can be in difficult to reach areas. If pulling it out does not seem to be working you may want to use...

4-Way Trailer Wiring Harness Recommendation for RV that Has Separate Signal 6-Way Installed

I have a 2007 Winnebago View on a 2006 Mercedes Sprinter Chassis that has a 6-pin socket. The brake and backup lights are not tied into the turn signal wires see attached wiring diagram. I purchased a 6-pin round to 4-pin flat adapter because...

Trailer Hitch and Wiring for a 2011 Nissan Cube

Hi I just received my trailer- hitch and I have a few questions. Will I be able to tow a 200 lbs. boat and a 200 lbs. trailer with it. Also why am I cutting holes in the frame is it just for wiring. Please let me know. I have a 2011 Nissan...

Curt or Draw Tite Trailer Hitch Recommendation for 2010 Nissan Cube

I am interested in a hitch for a 2010 cube but am concerned about the fit of thefit around the muffler. Just wondering if the kind which goes under the exhaust is better for fitment? Thanks for your time | The Curt part # C11202 is a confirmed...

Does Trailer Hitch C11202 For 2009 Nissan Cube Include Ball Mount?

Hello, I am interested in purchasing a tow bar for a Nissan Cube which I found in your online store: https://www.etrailer.com/Trailer-Hitch/Nissan/Cube/2009/C11202.html Could you please let me know the shipping charges to Poland ? I would...

Availability of Hitch, Trailer Wiring and Towing Accessories for 2014 Nissan Cube

As you might already know, Nissan has discontinued the cube in the USA. Do you still have a hitch and wiring harness for the 2014 model? | Curt Manufacturing does indeed offer a Class I hitch for the 2014 Nissan Cube, which we offer as part...

Recommended Bike Rack to Carry a Day 6 Bike on a 2012 Nissan Cube

We have a 2 adult Day 6 bikes and a 2012 Nissan Cube. What bike racks can you recommended for us? I am looking at trunk mounted bike racks. The bikes are 38 lbs each, and the frames are not typical they are longer because the bikes are semi-recumbent....

Availability of Replacement Install Hardware for Trailer Hitch

Do your hitches come with any replacement hardware if needed | We do sell replacement hardware for the trailer hitches we offer with the part # RHK. You'd need to enter the hitch part number and select the manufacturer from the drop down menu...

Is Drilling Required for Installation of the Curt Hitch # C11202 on a 2011 Nissan Cube

2011 Nissan Cube will have to drill the 1inch hole? | The only drilling need for the receiver hitche # C11202 available for the 2011 Nissan Cube will be enlarging an existing hole in the driver side frame rail. I attached installation instructions...

Trunk-Mount Bike Rack for 2013 Nissan Cube

please suggest 2 and 3 bike trunk racks | The two trunk-mount bike racks I prefer for the 2013 Nissan Cube are the Hollywood Racks 2-bike # HRF2 and the similar 3-bike versions # HRF2-3. Both feature an arched frame design that will put less...

Filter Your Search