Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Hitch Bike Rack for 2017 Cadillac CTS-V
Which of the these two racks will be the highest off the ground? and the shortest? I want to make sure that it doesn't drag when I go up and down driveways and grades. Thule Helium 2 Bike Platform Rack # TH44VR or the Thule T2 Classic # TH9045?...
Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Recommended Roof Bike Rack Compatible with Rhino Rack Vortex Roof Rack
I have a RHINO RACK vortex roof rack...I need to get a bike tray for the top of my car. I will be primarily using it for a BMX bike with pegs. Will the Rhino arm clear the pegs on my bike, or is there another tray that is compatible with the...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Availability Of Trailer Hitch For 2012 Cadillac CTS4 Coupe
I need a class1 hitch for a 2012 CTS4 Coupe with 3.6 engine. For a 4x6 trailer to haul a motorcycle or a 4 wheeler. What do you recommend? | Hello Michael, thanks for reaching out. I am sorry to say there is no hitch made for the 2012 Cadillac...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Will The Covercraft Ultra'tect Custom-Fit Outdoor Vehicle Cover C17771UG Fit 2019 Cadillac CTS?
What does excluding V-Series mean? | Hey Larry, thanks for getting in touch. When it says "excluding V-series", that means the product will fit all models, except for the V-series models. So in the case of the Covercraft Ultra'tect Custom-Fit...
Hitch for 2010 Cadillac Sedan CTS
need rear bumper hitch 2010 cadilac 4 door cts do you have | Hey Douglas, we have the Draw Tite hitch part # 24767 that is a fit for your 2010 Cadillac CTS sedan. This attaches to the rear vehicle frame and puts the hitch right at the rear...
Is There a Hitch Available for my 2012 Cadillac CTS Wagon
I see you have hitches for 2012 Cadillac CTS. I have a CTS Wagon. Will these hitches fit the Wagon also? Are installation instructions the same? | Thanks for your question, Gary. As of right now there is not a hitch that we carry that fits...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Recommended Trailer Hitch for a 2013 Cadillac CTS-V Sedan
Can your hitch be installed on my 2013 CTS-V Sedan? Thank you! | Billboard, good news yes the Draw-Tite # 24767 can be installed on your 2013 Cadillac CTS-V! This hitch has a 2,000 lb towing capacity, a 200 lb tongue weight capacity, and...
Wheel Chocks Needed For 26" Diameter Wheels
I have your yellow e-chock wheel chocks, but the curvature of the chocks dont come close to matching my wheel 26 diameter. I need chocks with a different curvature of the chock. Any comment. | Hey Michael, The Erickson E-Chock Wheel Chocks...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Does Draw Tite Hitch 24767 Fit CTS-V Models
Looking for class 1 hitch for 2008 Cadillac CTS-V. The Drawtite 24767 is listed side by side as For CTS-V and Not V-models Which is correct? Thanks | Hey Jonathan, so I apologize for the confusion but the Draw Tite hitch part # 24767 actually...
Do You Have a Hitch for a 2009 Cadillac CTS4 Sedan?
Will any of these hitches fit my 2009 CTS4 sedan? | They sure will Philip! For your 2009 Cadillac CTS4 sedan, I recommend the Curt Trailer Hitch item # C11307. This custom fit class I hitch has a 1-1/4" receiver. It comes with all hardware necessary...
Is There A Hitch Receiver For 2010 Cadillac CTS Wagon?
Does this hitch for the 2010 CTS Wagon? | Hey Greg, unfortunately it doesn't fit. Curt used to have one that fit - Class 1 Trailer Hitch, 1-1/4" Receiver, Select Cadillac CTS #11013 but it's been discontinued. You may be able to find left over...
Filter Your Search
Contact and Help