Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Not Getting Turn Signal Function When Using LED Bulbs On A Trailer
Installed 1157 LED bulbs. If I hook up both wires to the tail lights I only have the brake light/flasher function, no tail lights. If I unhook the brake light/flasher wire the tail lights work. Do I need to install a resistor? Are the four...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Recommended Hitch for a 4WD 2000 GMC Sonoma SLS
Need a hitch for 2000 GMC SLS Sonoma does not have step bumper, has original bumper. Revomend trpe hitch Thanks | Hey Jerry. If your 4WD 2000 GMC Sonoma SLS has the Sportside bed with built in steps in front of and behind the wheel wells and...
Recommended 30 Amp Active Controls ActiveStart Plug-In Soft Start for RVs
where is soft start made? where does it ship from? for the price it should have 3 year guarantee. purchase depends on your answers. Thanks | Hey Ray. The Active Controls ActiveStart Plug-In Soft Start for RVs item # AS44FR is designed and assembled...
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Recommended Weight Distribution Hitch for a 7,000 lbs Short V Nose Trailer
This is a follow-up question to Adam R and your response to him. My trailer looks exactly the same as his picture...only about 15 inches of exposed frame between the center of the ball and the V Nose trailer wall. The side walls cover the side...
Can You Use a 2" Hitch Extender When Towing to Let Tailgate Down
I have a Rivian R1T electric truck. I also have a brand new Forest River Rockwood 2318G pop up camper that weighs 2600 dry, maybe 3500 lb with water and belongings. My issue is Id like to extend the hitch by 24 so I can put the tailgate down...
How Big is the Clamp on Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent
what is the opening of the Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent? to fit over a truck cross car brace. | I reached out to Yakima and found that the opening for the Replacement Mounting Bracket for Yakima SkyRise Rooftop...
Replacement Tailgate Corner And Bed Cover For The Extang Tuff Tonneau Cover Part # EX14560
Do you have a replacement tarp for Extang Tuff Tonno 14560? If so do you also carry the plastic tailgait corners? Thanks! | I do have both the replacement tailgate corners and bed cover available for you. For the tailgate corners you will need...
Can Oil Bath Hubs be Converted to Grease Hubs
I have 8K dexter axles and the RG04-230 are the oil caps i have but i want to switch to grease, the bearing buddy sizes are showing different sizes so im not sure which ones i need to fit my threads. I see several of your answers on this type...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Jet Needed To Run A Firman 3,300 Watt Rv Generator In 5,000' To 6,000' Elevations
Does a duel fuel generator like your Firman 3300 have to be adjusted for altitude when using propane? I will be traveling from sea level across several states with varying elevations up to around 5-6000 feet and dont want to have to change...
How to Select Replacement Hub Assembly for Ranger Tandem Axle Trailer
need vortex hub replacement for a 2007 Ranger dual axle trl what info do I need to get the correct hub thanks | Vortex hubs are made by Tie Down Engineering and are claimed to offer reduced maintenance requirements. We do not offer these hubs...
Is The Adarac Aluminum Series Ladder Rack Compatible With A 2022 Rivian R1T With Tonneau Cover
I have a 2022 Rivian R1T with a manual Rivian tonneau cover. Just want to confirm I can still use the cover, which is a set of panels that slide into the bed rails, when this rack is installed. Also, can I get the specifications on the crossbars?...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Brake Controller and Trailer Wiring For 2005 Honda Pilot
I have a few questions 1. We have a 2005 Honda Pilot with a hitch. What parts are needed to convert from a 4 pin to a brake controller? 2. If we sell our Honda but do not provide/sell the brake controller depending on answer to 1 with the...
Filter Your Search
Contact and Help