Location of Fill Ports on Valterra RV Water Tank
How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...
Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height
I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...
Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover
2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...
Ladder Rack that Fits 2025 Rivian R1t
Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...
Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch
Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...
Recommended Replacement Brakes, Wiring, and Hardware for a Dexter 5.2K Axle
Im looking for brake assemblies for a 5200 lb Dexter axle. I would like to add cable operated parking brakes also. Could you lead me in the right direction please. Also, is there a kit for the required cables, hardware and lever available? Thank...
Replacement Fender for Shorelander SLR80TAL
Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...
Steering Stabilizer for a 1999 Freightliner FL60 Medium Duty Truck
Hello I have a 1999 Frightliner FL60 medium duty truck looking for a front steering stabilizer. It currently has one installed already but don’t know the brand. I want to install a new. Any suggestions or information would be greatly appreciated....
Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels
Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...
Will Maxtrax Mounting Brackets Fit Rivian Cargo Crossbars
Will this fit Rivian Cargo Crossbars? | Hey Philip, thanks for reaching out! The Maxtrax Mounting Brackets # MA92PR were designed around the Rhino-Rack Vortex crossbars so as long as the T-Slots for your Rivian crossbars are similar to the...
How Does Adarac Aluminum Series Ladder Rack A33VA Fit with Tonneau Cover
Hi, I own a 2022 Rivian R1T, with a power tonneau cover. After reading your materials, Im still not 100 sure of how the Ladder Rack mounts to the truck bed? Im seeing no drilling is needed great!, but wasnt totally sure if the tonneau cover...
Replacement Parts for a Kwikee 27 Series Step
I need all replacement parts for knicker series 27double 29 x10” steps | Hey Dwight! You're in luck because we have a complete set up for your Kwikee 27 Series step. It is the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps...
Can The Rhino-Rack Roof Rack For Tracks Be Installed On Rivian Factory Mounting Points
Hi. I have a 2022 Rivian R1T Will the RhinoRack crossbars work for my factory bed top edge attachment points? Thanks, Nick | Hey Nick, The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT uses an M6 24x24x4 Nut to mount into...
Replacement For Tekonsha Voyager Brake Controller In A 1998 Freightliner FL-60 Toter Truck
I have a 1998 Freightliner FL-60 Toter truck for towing my 42 toy hauler Triaxle toy hauler with. My present Tekonsa Voyager has crapped out. What brake controller would you recommend for this setup. Thanks! | Hi William! Since Tekonsha...
Recommended 2-1/2" Trailer Hitch for a 2006 Thomas School Bus
Have a 2006 Thomas school bus. Best I can tell it’s a freight liner chassis. Frame width is 34 inches outside to outside. I am looking to find a hitch to fit this with 2 1/2 inch receiver. | I do have an option for you but there aren't any custom...
Recommended Weight Distribution Hitch for a 7,000 lbs Short V Nose Trailer
This is a follow-up question to Adam R and your response to him. My trailer looks exactly the same as his picture...only about 15 inches of exposed frame between the center of the ball and the V Nose trailer wall. The side walls cover the side...
Buyers Products Hitch Plate Dimensions
I have a freightliner FL70 with the 34” frame looking for a receiver hitch for it with the pintle hitch. I don’t see where any of the ones on your website shows the measurements for the frame. Looking for any help I can get so I can purchase...
Can You Use a 2" Hitch Extender When Towing to Let Tailgate Down
I have a Rivian R1T electric truck. I also have a brand new Forest River Rockwood 2318G pop up camper that weighs 2600 dry, maybe 3500 lb with water and belongings. My issue is Id like to extend the hitch by 24 so I can put the tailgate down...
Bolt Hole Dimensions for Curt Trailer Hitch Receiver # 14080
what are the bolt hole dimensions on this hitch cl to cl | The distance between the bolt holes on the Curt Trailer Hitch Receiver # 14080 is 39-1/4" center-to-center. I have attached a photo to demonstrate this. Please note that this trailer...
How Big is the Clamp on Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent
what is the opening of the Replacement Mounting Bracket for Yakima SkyRise Rooftop Tent? to fit over a truck cross car brace. | I reached out to Yakima and found that the opening for the Replacement Mounting Bracket for Yakima SkyRise Rooftop...
Brake Controller Installation with Existing 6-Way Trailer Connector
reading on previously asked questions, you say: Next, you will need the wiring to install the controller and the wiring to add a 6-Way. To add a 6-Way, you will first need to have a 4-Way trailer connector on the truck. If it does not already...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Parts Needed to Install a 7-Way Trailer Connector and Brake Controller on a 2000 Freightliner FL70
I want to install a brake controller and a 7 wire blade trailer connector on my 2000 Freightliner FL70. What pig tail harness and brake controller do you have for this application. I will be towing a three car trailer with a total of 6 brakes....
Is The Adarac Aluminum Series Ladder Rack Compatible With A 2022 Rivian R1T With Tonneau Cover
I have a 2022 Rivian R1T with a manual Rivian tonneau cover. Just want to confirm I can still use the cover, which is a set of panels that slide into the bed rails, when this rack is installed. Also, can I get the specifications on the crossbars?...
Filter Your Search
Contact and Help