Result:

Articles

Option For Class S Compatible Snow Tire Chains for 275/65R20 Tires

I have a Nissan NV3500 with custom wheels and tires 275/65r20. I’m looking for diagonal pattern tire chains that fit and: - can be put on without moving the van - are SAE Class S compatible - have rim protection - have automatic tensioning Can...

Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22

Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...

Will The Curt Front Mount Trailer Hitch C31077 Fit A 2014 Nissan NV3500

Hello - I’ve noted others have mounted this hitch on newer than mine NV3500’s. I have a 2014 NV3500, I believe it WILL be a bolt on. Any input would be appreciated, thank you! - Mike | Hello Mike, thanks for reaching out. According to Curt,...

Brake Controller and Wiring Recommendations for a 2015 Nissan NV 3500

I am looking for a brake controller for my 2015 Nissan nv 3500. | Hey Thomas, thanks for reaching out! I really like the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness # RED53CR because it comes with an adapter that plugs right into...

Could High Altitude Jets be Used in 4,500 Watt RV Generator at Lower Altitudes

I am interested in the 4,500-Watt Portable RV Generator. We live at 7200foot but frequently go camping at a range of elevations from 2500foot to 9000. If I install the high altitude jet in the generator, will it operate OK at lower elevations?...

Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?

For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...

Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?

Would this roof rail system work for a nissan nv3500 passenger van? We are looking for something for travel that doesnt make our van look like a work van | I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof...

Installation of 4-Pole Wiring Harness in 2017 Nissan NV 3500

I am needing to find out how to wire trailer lights in a 2017 Nissan NV3500 Passenger van. Thanks, | To install the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56148 in your 2017 Nissan NV 3500 you only need to plug...

Recommended WDS for a 2019 Nissan 3500 Towing a 2019 Winnebago Minnie

Hi, I have a 2019 Nissan NV 3500 SL with the tow package. I am looking to buy a 2019 Winnebago Minnie. Can you recommend the type of sway control, shank, and ball I should get? Thank you! | Andrew, for your 2019 Nissan NV 3500 towing a...

Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?

Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...

Does Timbren Suspension Kit Increase Towing Capacity of Vehicle

What does this 6000lbs capacity mean? Does it mean payload? My Nissan NV3500 passenger van payload is 2500lbs. Then should I choose 3000lbs rather than this one? Not sure which capacity is right for my van. | Hey Kyoung, so the Timbren suspension...

Components Needed to Tow a 2016 Nissan NV 3500 with a 2021 Nexus Ghost International Chassis

I am looking to get a tow bar setup to use on my 2016 NV 3500 Passenger Van. Pulled by my 2021 Nexus Ghost International Chassis. I have been looking everywhere and finding all the correct parts has been hard as I dont think there is anything...

Wind Fairing For 65 Inch Vantech Aero Crossbar

I have a 65 wide roof bar on my Nissan NV 3500 from Vantech. It gets loud when we drive. I would like to put a wind fair on the front bar to help with the noise. Do you have a product that you can recommend for the width of 65 and 5 high that...

Parts Needed to Add Yakima LockNLoad Platform on a 2021 Nissan NV 3500

Bob's response seems technically accurate since the question was about the 84" Long x 62" Wide LockNLoad platform sold with hardware to mount to crossbars. However, per Yakima's website, the 76" Long x 65" Wide LockNLoad (Platform J) is recommended...