Can the Lippert Components RV Spare Tire Carrier Be Used On a Motorhome
Can I mount your spare tire carrier under a Ford F53 chassis motorhome? | The Lippert Components RV Spare Tire Carrier part # LC159041 is designed primarily for trailers so it would not be a good choice for your motorhome. The weight of the...
Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22
Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...
Is There a Trailer Hitch for a 1988 Suzuki Samurai
do you make a hitch for a 1988 suzuki samurai | Yes, we do offer a trailer hitch for a 1988 Suzuki Samurai, the Curt Trailer Hitch Receiver part # C11277 which is a direct bolt-on option with no drilling required. It is the only option for this...
Flat Towing a 1990 Suzuki Samurai With Separate Tail Light Wiring
I purchased a 1990 Suzuki Samurai that has been previously wired for towing behind an RV. It is a butcher job and I will be removing it and all its splices into the OEM tail light housings and wiring. I am installing all new OEM tail light housings...
Surco Safari Mounts for a 1988 Suzuki Samurai with Gutters
Willthis part work on the drip rail of my 1988 Suzuki Samurai? I want to mount a cargo basket on the top usig the drip rails to anchor it. | Hey Stephen, thanks for reaching out! Yes, the Gutter Mount Adapter # SU72VR is exactly what you'd...
Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?
For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?
Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...
How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S
what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...
Where Do the Longer Straps for the Rampage California Brief Go
Does the long strap at the rear of this top attach through the loop at the rear corners of the vehicle that are used for full soft tops? I don’t see a photo showing this. | Hey David, from what I can find in the instructions, the longer straps...
Recommended Wiring for Tekonsha Prodigy P3 Brake Controller in 1986 Suzuki Samurai
Ok I know this is very non-typical but here goes. I own this brake controller, it stays attached to my motor home RV. I pull a very lightweight aluminum 12ft trailer which hauls my tow vehicle - a 1986 Suzuki Samurai. I also throw my kayaks...
What does the Bottom of the Rampage Padded Center Console for Suzuki Look Like? How to Install.
You did not show the bottom of the console. I would like to know if there is a mounting bracket across the bottom if not how does it mount to the floor of the vehicle for stability? | Hello Allen, Great question. For the Rampage Padded Center...
Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20
Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |
Adding Rhino-Rack Tracks and Crossbars to 1986 Suzuki Samurai
Hello, I am looking at the Rino Rack Y02-480B canopy topper rack- tracks and bars as a possible roof system for my 1986 Suzuki Samurai with a full fiberglass top. I understand the tracks can be cut down to length from their original size,...
Will Blue Ox Aventa II Fit Blue Ox Base Plate Kit on 1987 Suzuki Samurai
Hi, I’m needing a baseplate for my 1987 Suzuki Samurai, will my existing Blue Ox BX7335 Aventa II work with this baseplate? Thanks | Hey Joseph! The Aventa II is compatible with the Blue Ox Base Plate Kit # BX3501. You will also need tow bar...
Does etrailer Customize Products Like 2-in-1 Exterior Windshield and Wiper Blade Cover
Do you customize, add logos or other? | Hi Troy; adding customization like a logo to the 2-in-1 Exterior Windshield and Wiper Blade Cover # e98899 is not something we do here at etrailer. If you would like to have that done you would have to...
How To Flat Tow Jeep Wrangler JK with AEV Front Bumper Using Blue Ox Base Plate Kit
I got your info from a friend who you had helped previously so I hope I’m reaching out to the right person. I’ve got a 2017 Jeep Wrangler JK I am looking to purchase a complete Flat tow set up for, my primary question is in regard to the AEV...
Distance Between The Mounting Tabs On A The Roadmaster Direct-Connect Base Plate Kit # 1437-3
Website shows all measurements except one thats very important. I need to know the measurement inside to inside of the tabs themselves, where the coupled goes in and pin goes through to secure. Thanks | The distance between the two tabs on the...
Flat-Tow Wiring for a 1988 Suzuki Samurai with Combined and Separate Signals
I have a Ready Brake surge type tow bar to pull a Samurai with custom bumper and lights. I have 4 lights, the outside lights are brake and turn signal and the inside lights are brake only. My tow bar has a mechanical brake actuator. If I wire...
What Tow Bar and Mounting Brackets Will I Need to Tow 1987 Suzuki Samurai
tow bar? what do all I need with ordering tow bar... Do the tow bars come with mounting brackets for my Suzuki if not where do I find those, and will they go with hook up style of the tow bar? Thanks | There are a few things you will need along...
Flat Tow Setup For A 1986 Suzuki Samurai
I have 86 suzuki samurai I want to flat tow. Im looking at RM-501 and 1003-1. Are those compatible and is the 910021-00 necessary for this set up? Or is there a better set up for around? | If you're wanting to use the Roadmaster StowMaster Tow...
Base Plate Fit on 1987 Suzuki Samurai With Front Leaf Springs
The instructions say to remove bolts on torsion bar mounts. The Samurai does not have torsion bars. It has front leaf springs. Where does the base plate mount with the leaf springs and what other changes are there to mount it to the vehicle?...
Recommended Parts for Flat Towing a 1986 Suzuki Samurai
I just picked up a completely stock 1986 hard top Tin Top Suzuki Samurai... It has never been set up to tow, but I got it to flat tow behind my new to me motor home Class A 2012 Fleetwood Terra 31TS... The car weighs 2200#s, so its pretty light. What...
Filter Your Search
Contact and Help