Cover Recommendation for a 22' Class B Motorhome
I an looking for a recommendation: rv cover, 2002 class b r vision trail lite. Thank you | In order to recommend the correct cover I'll need you to take a measurement of your Class B RV. You'll need to measure from your front bumper to your...
Can Bike Rack and Kayak Carrier be Used with Flat Towing Setup
Is there a rack to carry both bikes and kayaks Between motor home and toad with a blue ox towing hitch with a dual receiver | With a dual hitch adapter you could put a bike rack in the upper hitch opening like the Lets Go Aero part # B01748...
Curt Trailer Hitches that Fit 1998 Chevy S-10
My tow hitch part #13020. I need to know if it will fit a 1998 Chevy s10 | For your 1998 Chevy S-10 we have Curt hitches that fit like the # C13021 which fits models with the factory step bumper and the part # 13920 which fits models with...
Wiring A 3rd Brake Light On A Truck Cap On A 2002 Chevrolet S-10
what is the best way to wire brake light on truck cap to a 2002 chevy S10 pickup ? | You have a couple of places you can look for the center high mount stop light (CHMSL) circuit on your 2002 Chevrolet S-10. First, if you have a trailer connector...
Trailer Hitch Recommendation for 2001 Chevy S-10 with Factory Step Bumper
Heya, Looking at the bottom of my step bumper I dont see how this will attach properly. The step bumper appears to be hollow on the bottom, rather than a flat stock and has tabs extending down at angles with holes in them, presumably for bolting...
Can 2000 Chevrolet S-10 Extreme Pickup Be Flat-Towed
What parts will I need to tow a 2000 s-10 p/u extreme on all 4 with a stowmaster 5000 tow bar ie wiring harness base plates | I did some research and found that the manual for the 2000 Chevrolet S-10 pickup states that the vehicle is not to...
I am looking for this part or similar 1403235-4 | I am sorry Juan but we do not have Lund tonneau covers or any replacement parts that will work with them. |
Replacement Step Pad For Westin Rear Bumper On A 1999 Chevrolet S-10
Will the above item fit a 1999 Westin rear bumper? | The Replacement Step Pad for Westin Fey Surestep Bumpers # 00000975 is designed to replace the step pad on the Westin Fey Surestep Rear Bumper # 66001 or the Westin Fey Surestep Rear Bumper...
etrailer Trailer Hitch Fitment on a 1995 Chevy S-10 for Light Duty Trailer Towing
I need to tow a small trailer with my '95 S-10. Will this do the trick? | Yes, the etrailer Trailer Hitch Receiver # e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because...
Can Trailer Ball Hole in Towing Bumper Be Enlarged to Accommodate a 2-5/16 inch Trailer Ball
hello, i have a trailer that uses a 2 5/16 ball but the hole in my bumper is to small. would i be able to make it bigger safely? the hitch that is in the pic is not any good and has been cut on or i would just use it. | I wouldn't recommend...
Fit of Access Roll-Up Tonneau Cover Part # 834532000258 on 2000 Chevy S-10
inside measurements are 48 3/4 x 6 will this cover fit or do you have one that will | As long as your 2000 Chevy S-10 with the 6 foot bed is a step-side model, the Access Roll-Up Tonneau Cover part # 834532000258 is the correct fit for...
Installation of Westin Nerf Bars # 25-0675 on 1999 Chevy S-10
I bought a set of the Westin Nerf bars for my 1999 S10 ZR2. When I looked under the frame, the mounts for these are not on the frame. I need some kind of mount that connects to the frame soo I c an attach the nerf bars. If I drill straight...
Does the Westin Fey Bumper # 66001-97200 Come with a Hole to Access the Spare Tire?
Please verify that this bumper has a hole left of the license plate area to access the spare tire hanger for lowering. Thank you | I have an answer for you. Unfortunately, our installation team here at etrailer confirmed that the Westin Fey...
Recommended Hitch for a 2002 Chevy S-10 Extreme that Mounts Behind the License Plate
Looking for a hitch that will fit behind liscense plate on a 2002 s10 xtreme stepside extended cab | Thanks for the picture! For your 2002 Chevy S-10 Extreme, you will want the Curt Trailer Hitch item # 13920. This hitch is custom fit and bolts...
Furrion Powersmart Power Inlet Replacement for Power Cord Conversion Kit With LED Light
Can I just get a replacement lid with the light? 2018 Sunset trail. Super light. Furion receptacle | We do have a replacement that will work for you, even though the lid alone is not available separately; however, the inlet of the Furrion RV...
Trailer Hitch Recommendation for 2003 Chevy S-10 with Stepside
I have a 2003 Chevy S10 with a step bumper. I am considering installing a trailer hitch and want to make sure that I purchase one the correct one. All I will towing is a small kayak trailer with, at most, 4 kayaks. What do you recommend? |...
Brake Controller and Wiring Recommendation for 2003 Chevy S-10 with 7-Way
Ive recently purchased a 2003 Chevy s-10 pickup and I intend to occasionally pull a 16 foot trailer with one axle braking. It has a Hopkins 4/7 connector like you show for Code 30955. Assuming it is installed correctly, what brake controller...
Recommended Wiring For 7-Way Trailer Connector And Brake Controller For 2003 Chevy S-10
I got good answers from Jameson C regarding 2003 S-10 that I recenlty purchased, but guess I need to see what else is already in the truck. Definitely was no controller left with it, but havent checked under dash to see if one had been there....
Class III Receiver for 1999 Chevy S-10 Extreme Sportside
I am looking to put a hitch on my 1999 chevrolet s10 extreme stepside and I dont know which hitch is going to work with the factory ground effects and non towing bumper. I am not looking for heavy hauling just enough to haul my small trailer...
Recommendations to Flat Tow a 1991 S-10 and a 1997 Jeep Wrangler TJ with a Tracker Tow Bar
If using the 107-1 base plate will the RM-020 tow bar work with this set up. I am trying to design a tow system that I can switch the tow bar between an S-10 and a 1997 Jeep Wrangler TJ by just mounting the base plates on each then we could...
Replacement Westin Bumper Install Kit for 1991 Chevrolet S-10
Hi, I am considering purchasing the Westin 76001 SureStep Universal Style Rear Bumper. Question, will it fit directly onto my existing stock bracket? Thank you | The Westin Fey Surestep Rear Bumper # 76001 requires custom install brackets...
Replacement Velcro For Truxedo Tonneau Cover On 2002 Chevrolet S-10 With 4-1/2 Ft Bed
need new velcro strips for Truxedo cover. Im confused about where to measure width. The velcro measures an inch, but the channel seems to be 1 5/16. 2002 S10 LS, but the cover was purchased and installed in 2007. Sounds like this is just what...
What Vehicles Does Curt Trailer Hitch C13021 Fit and Replacement Hardware for the Hitch
What other vehicles does this hitch fit? | Curt Class III trailer hitch # C13021 fits the following vehicles: 1982 - 2004 Chevrolet S-10 Pickup with Factory Step Bumper 1982 - 1990 GMC S-15 Pickup with Factory Step Bumper 1991 - 2004 GMC Sonoma...
Recommended 4-Way Trailer Wiring Harness For 1996 Chevrolet S-10
Will this work on a 96 s10 the same as on the 99 s10 | The correct wiring harness for your 1996 Chevrolet S-10 is part # HM41115. You just plug this harness into the wiring harness on your truck that is located under the truck on the driver...
Filter Your Search
Contact and Help