Result:

I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...

Does a 2 inch lift require any additional parts? | Hey Sean, if you have a 2 inch lift on your vehicle you can still use the Air Lift kit # AL57340 but you will need to use the 2 inch spacer kit part # AL52420 to take up the extra space created...

Is there any drilling involved to mount brackets for the bags? I realize you will drill holes for air lines. Bracket mounting is unclear to me. Is there an installation video for this part number? Thank you | Yes. There is drilling required...

I'll be using my 2005 Ford Excursion like a truck to haul some heavy stuff so I'm looking for some air springs. I like how you can adjust them because the weight I haul will be different each time. Any recommendation would be greatly appreciated!...

I currently have a set of Lippert 3500 lb axles V000113211 - LCI35-SB-86.5-68.5-NOSP-OS-L-545-7209-18PT and want to upgrade to 4400lb. Is there a equal in Dexter to look at? | When you are looking for a replacement axle there are a few measurements...

I have a 2005 Ford Excursion with the 6.0, everything on the vehicle is stock. I am pulling a 9,000lb 37’ travel trailer with the husky round bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly and Sway Control only 1...

I currently have a pioneer rack mounted to a yakima bar. Im looking for an adapter to go from the yakima feet directly to the c chanel on the pioneer rack to lower the assmebly 3-4 inches...any suggestions? Thank You | I have a solution for...

I would like a roof rack system for my 2005 ford excursion. I have the factory channels running the length of the roof. I want to put gun cases, luggage ext. up there and tie it down. Would like side rails and a ladder cause its lifted and...

I have a Thule Mountaineer. I am not sure of the year but I am missing some of the hardware for the TH04997. If I have to buy a new mounting kit I would like to update to the Quick Release 05704 kit. Any problem with this update? I will be...

would this hitch physically fit/mount on a 2005 Excursion 4x4, 6.0 diesel? I realize it is more hitch than I need, I just want to know if it would install? Thanks | I have a very high capacity hitch I can recommend for your 2005 Ford Excursion,...

What are the internal dimensions of the Yakima Skybox | The Yakima SkyBox 21 Rooftop Cargo Box - Black Carbonite # Y07337 has an internal length of 80 inches and internal width of 29 inches, with a height of just under 18 inches. The SkyBox...

I currently use the Reese 54970 with my Reese 66021 WD Hitch. I upgraded my trailer and now need to upgrade my hitch. I need a solid shank for my new Draw-Tite 7979-1 double tab hitch head which requires a solid shank. Both the shanks are same...

hello, looking at Item # EP84030 can you tell me if the monitor actually shows a fuel economy gauge? thanks | Yes, the Edge Insight CS2 Comprehensive Gauge Display part # EP84030 has a feature called "Mileage Coach". The mileage coach allows...

I had an axle replaced last year, but the new one was incorrectly made longer than the one it replaced by 1.5”. Does having a staggered stance affect tire wear or towing, or does it just look odd? Would 3/4” wheels spacers be advised on the...

I have a 2021 XLR Nitro 321 toy hauler. My Lippert auto leveler system is giving an out of stroke error. I have done multiple resets and attempts. I have the toy hauler leveled manually and I am on a relatively flat surface. It is plugged into...

Hi, Im looking at upgrading my current battery to the brightway BRW37FR. I was just wondering what I will need to allow a trickle charge from my alternator as well as recommended solar panels. Also, is there an inverter setup available to run...

Whats point of hitch if you have to buy new dog light housings all after market housing are factory looking fog lights there is no other location to put fogs unless you spend 2 grand on bull bumpers | It isn't ideal to have to remove the factory...

Hello, I take that the battery box is made from 100 aluminum. Is it possible to have the box NOT powder coated with black paint? | The TorkLift PowerArmor Solar Locking Battery Box # TLA7710RS is made from aluminum but there is no option to...

Will this install on the above truck? Do I need any other adapters? I am towing a double axel travel trailer. T.y. For your help. | Yes, the Curt Brake Controller part # C74VV that you referenced has been confirmed to fit your 2005 Ford Excursion....

i have a 2015 Ford F350 4x4 crew cab. it has a service box bed added. the factory back up camera was eliminated with the factory bed. Putting in reverse, the factory nav screen says no camera detected. Can i assume the wiring is in place and...

Could you indicate the height of the seat? | The overall height of the Powerbuilt Heavy Duty Rolling Seat with Organizer # PO94FR is 14-1/2 inches. I went ahead and created a diagram that shows this dimension and included it to this answer. |

Hello, I have a triple axle trailer and Excursion that we pull with. I am also have air bags and would like to monitor the pressure as well. Is it possible to have a 11th sensor added to this system? | The TireMinder A1AS TPMS for RVs part...

What is the weight limit of these running boards on a 2005 Ford Excursion? | There is not a specified weight limit on the Westin Grate Step # 27-74745-1215 but they will fit your 2005 Ford Excursion. |

I recently purchased a 2005 Ford Excursion Limited, 6.8L/V-10. I previously owned a Chevy Suburban 1500 5.3L/V-8 and burned up 2 transmissions pulling an 8000lb Jayco Travel Trailer. Ive learned from my bad experience with the Chevy, and want...