Does Wiper Technologies Heavy Duty Windshield Wiper 28 Blade Fit Wide Saddle Mount
is this blade what they call a wide mount? | The Wiper Technologies Heavy Duty Windshield Wiper Blade # WPR56FR fits an arm with a 1/2" blade saddle. A wide saddle mount covers a variety of widths, so it is best to know what mount you actually...
Will The Replacement Sidewind Handle Kit # F0933305S00 Fit Fulton Magnum Jack On 2002 Boat Trailer?
How can I find the part number for a Fulton magnum series? It was on a 2002 five star trailer for a 20 foot boat. I need a handle replacement. Is this the right part? Thank you! | With the Magnum series of Fulton jacks being obsolete you will...
Is There Any Way To Mount The Fulton XLT Powered Drive Trailer Jack # F141401 on 7-1/2" Tall Frame?
I have a trailer with a seven and a half in. frame is their a way can put the Fulton XLT Side mount power jack on it. | There are a couple options to mount the Fulton XLT Powered Drive Trailer Jack # F141401 onto your 7-1/2" tall frame. The...
Replacement Swivel Jack For A 3" x 3" Mounting Bracket Hole Pattern
Will this jack work with this setup? Im replacing a broken jack. | Yes, the Fulton Bolt-Thru Swivel Marine Jack # F1411300301 has a matching 3" x 3" bolt pattern to match up to your welded on mounting bracket. |
Solution for Needing Replacement Ratchet Pawl for Fulton XLT 1401
Is the rachet pawl availabl. Round rod out the side. Part no. 5 | We checked with Fulton and the part you are looking for has been discontinued. You will need to replace the entire winch because that ratchet pawl is no longer available and...
Recommended Sidewind Swivel Jack Replacement
The sliding cylinder has fallen and lost. Can I purchase and install a replacement? | We do not offer replacement tubes for your Shelby jack. If you are unable to find the replacement part you need I do have a similar jack that would work for...
Recommended Trailer Jack to Replace Shelby Model 5874A8
I currently have a Shelby 5874a8 trailer jack on my boat and I am looking for a replacement. Any recommendation? | To replace the Shelby trailer jack on your boat trailer, I recommend looking at the Fulton Bolt-Thru Swivel Marine Jack # FXP15L....
Marine Side-Wind Swivel Jack to Replace Shelby Jack 5856A
I need a replacement for the Shelby jack. pull pin, 5856A What would you suggest? | I suggest checking out the Fulton Round Snap-Ring Swivel Marine Jack # FTJ120W0301. This jack has a lift capacity of 1,200 pounds, a 10 inch lift and measures...
Coupler Lock Recommendation for Fulton Fas-Lok Style of Coupler
I have a fulton type reciever on my boat trailer with a square 3”! Nut on top to tighten the ball onto the hitch with a 2” ball! I am trying to find a lock for the boat hitch? | Sounds like you have coupler similar to the Fulton Fas-Lok part...
Replacement 3 Inch Wide Coupler Compatible with 2 Inch Ball for Shelby 2138
I need a replacement for a Shelby 5138 tongue. And not the demco - the standard latch. For a boat trailer so zinc. 2” ball, 3” channel and do you sell bolts for attaching it also? Not sure if they come in zinc or only ferrous metal. Thanks....
Spare Tire Carrier for Trailer that Has Angle Iron Trailer Frame
Ive got 12inch wheels with 21inch tires 4.80/12 - 5-4.5 lug wheels that I bought from you folks. Id like to get a spare tire carrier for my trailer. Its angle iron trailer and I am not sure if the u-bolt type stuff will work for stuff that isnt...
Bolt-On Side-Mount Dual Wheel Trailer Jack Recommendation for Utility Trailer
I have a 5’x10’ single axle utility trailer and need to replace the jack on it. I would like a side mount that will roll on dirt and grass. Thanks. | Since you want a side-mount jack that will work on dirt/grass surfaces I suggest a dual-wheel...
What Type of Steel is Replacement Pivot Pin for Fulton Coupler Hinge Kits # F500336 Made From
Is this pin stainless steel? | The Replacement Pivot Pin for Fulton Coupler Hinge Kits # F500336 is galvanized steel. |
Fender and Mounting Brackets for a Harbor Fright Haulmaster Trailer
I have a Harbor Fright Haulmaster trailer the tires size is 5.30-12 single axle can you please send me the part number or some info on what fender would for this. Thanks | I have a great fender for your Harbor Fright Haulmaster trailer it is...
Winch Recommendation for 3,190 lb Boat
We have a 2002 Super Air Nautique 21 feet long. It is 3190 pounds. Is this winch sufficient? | The 3,200 lb 2-Speed Boat Trailer Winch with 20' Strap and Brake # 315-W3200D will be sufficient to pull in your 3,190 lb boat if your trailer has...
Replacement For 3,200 lb Shelby 5480A Winch
Hi, I need to buy 2 replacement winches for use on my dock to keep the dock in place. Currently, there are 2 Shelby Industries I understand they went out of business MODEL NO. 5480A CAPACITY 3200 LBS. Do you have a replacement winch for these...
Replacement Dust Cap for a 2020 Keystone Passport
Looking for replacement dust caps for my 2020 Keystone Passort. they are like 3 inches. They snap in. I can share picture. | The closest dust cap size we have to 3" is the Fulton Grease Cap - 3.125" Outer Diameter # F001609. If you can get...
Replacement Tongue Jack With Wheel For 2000 MasterCraft Prostar 205 Boat Trailer Not Bolt-On
I am trying to replace the trailer jack on my 2000 MasterCraft Prostar 205 trailer. It has a welded on plate that I would like to use the attach the new jack to. The measurements for the plate bolts are 3 inches wide and 4 inches length top...
Determining Correct Replacement Gear Kit For Older Fulton Jack W/ 1-1/8" Diameter Bevel Gears
I have a 1989 Malibu Boat with a Fulton Jack, the jack is welded into the trailer frame, so I can not see any numbers on the jack to identify it, I already purchased the gear parts No: 0933306S00 and these are to big, so I need to know which...
Replacement Boat Winch That Will Hold Up In Harsh Salt Water Conditions
I have a 2015 single axle magic tilt trailer which hauls my 186 key west which ways around 2000 lbs fully loaded.I’m looking to replace the winch with one that holds up very well to the harsh Florida saltwater.what would you recommend?Thank...
Replacement Drop Leg and Cap for Fulton Square Jack
LOOKING FOR A DOWN LEG. FOR A HD2500101 AND HD50001001 FULTON JACK. AND LOOKING FOR THE TOP PLASTIC CAP THAT GOES WITH BOTH MODELS OF THE JACKS. CAN YOU HELP ME FIND THE PARTS, PART NUMBERS AND THE COST OF THE ITEMS. PLEASE LET ME KNOW IF...
Swivel Jack Recommendation that Can Pivot Out of Way of Tailgate
im looking for a jack that folds up on side not up and down but fold up and turns my truck hits the strate up and down ones need the one that folds up where it not sticking up where I can turn jack in case the tail gate falls down and it dont...
How to Install the Fulton Fold-Away Hinge on a Malone Ecolight Trailer
Hi, would it be possible to instal the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101 right where the two parts of the Malone Ecolight trailer couple together? My idea would be to avoid making a new cut and just remove the assembly plate...
Front and Rear Wiper Blade Replacements for 2009 Ford Explorer
Looking to buy three Bosch Icon AandB winter Wipers for: front 20 R and L and one rear 13 for a 2009 Ford Explorer XLT 4.6L V8 Please provide me Bosch product numbers for Left and Right incl. Rear | We don't carry the Bosch brand of wiper blades...
Filter Your Search
Contact and Help