Replacement Drop Leg and Cap for Fulton Square Jack

Published 06/29/2018

Products Featured in This Question

Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K

(207)

$43.01

Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs

(84)

$38.15

Question:

My guys measured the tube for the drop down leg. 2 inch on Fulton 5000. And 1-3/4 on 2500 jack inside for leg to go. If the leg you gave me is 2-1/4 that's to big.

asked by: PAM B

Expert Reply:

For your drop leg, I recommend the Bulldog Square, 18-1/8" Tall Drop-Leg Tube - 7,200 lbs to 10,000 lbs # BD70129201 which has a tubing width of 2-1/4 inches. The replacement cap for the Fulton jacks is # F0917504-00.

If you need the pin for the drop leg, use # BD500337.

expert reply by: Jason S

Pam

6/29/2018

My guys measured the tube for the drop down leg. 2 inch on Fulton 5000. And 1-3/4 on 2500 jack inside for leg to go. If the leg you gave me is 2-1/4 that's to big.

Jason S.

6/29/2018

Thanks for the updated measurements. For the 1-3/4 inch square drop leg, we have # TJD-5000-FT. For the 2 inch square drop leg, we have # TJD-7000-FT. Let me know if you need anything else.