!Monaco  x   >   Jif Marine  x   >  

Hi, re: item #315 eqb3, telescoping ladder. JIF marine states made of 304 ss but your ad states 314. which is it? thanks | I checked with our contact over at JIF Marine and the Telescoping Drop Ladder with Hand Grips - 3 Steps - 34" Tall -...

How deep are the cup holders? The ones on our boat table are so shallow the drinks tip over. | I've gone ahead and pulled the Octogon Boat Table # 315-DSI-KF from our inventory to measure for your specific question. There is a depth of 2-1/4...

i have a dual jet ski trailer and i need hand winches for both sides. which winches do you recommend? also do i need left and right handle sides? | In your situation I really like the Fulton Single Speed Trailer Winch part # F142007. While it...

Hello, I understand Shelby is out of business. Do you have a compatible winch handle for the Shelby 0937? Seven inch, fits Shelby winch 5405. Thank you! | As you mentioned, Shelby is no longer in business so there are no replacement parts,...

What is the Diameter of the mounting pole. My pontoon already has two recessed floor table mounts I want to make sure that the table pole will fit my existing mounts. | The outside diameter of the Table Leg # 315-DTX for the Octagonal Boat...

Hi, I like what I see for the JIF45FR-4 step or JIF75FR-5 step ladders. Trying to understand which would work on my pontoon boat. Couple questions: 1.When the ladder is pulled out of the base and hooked/locked, is the ladder perpendicular...

for the item: Jif Marine Pontoon Boat Mirror with Mounting Bracket - 8inch Wide x 4-1/2inch Tall - Aluminum Item # JIF72FR What size railing does the mounting bracket could fit on? | The Jif Marine Pontoon Boat Mirror with Mounting Bracket...

Are the bolt hole dimensions, center to center 3” apart and the single bolt hole 4” to center? See pic of bolt hole diagram. | The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake...

1. What is the distance after it is installed from the deck to the stand off bumpers. 2. What is the folded length not installed. 3. Are there any installation instructions . | According to Jif Marine, the distance after the # JIF48FR is installed...

JIF website says 304 Stainless your description says 316 Stainless Is the new ladder an upgrade to 316 ? | The Telescoping Drop Ladder with Hand Grips # 315-EQB4 is made of 304 stainless steel. The Jif Marine ladders have always been made of...

I have a 20 ft. Grady White with a 150 Yamaha outboard. I estimate the total weight including gear and fuel to be around 4000lbs. My trailer is a roller trailer. will this winch appropriate for this boat? Id also appreciate a recommendation...

I have a 6000-pound boat, but the trailer does not have rollers. It has carpeted bunks. The boat is 25 feet in length and has twin small block Chevy engines. What winch would you recommend, and I would be more than happy to purchase one a little...

One of my leaf springs broke. Can you tell me the replacement parts I would need to replace the leaf springs on both sides, replace axle and hubs, and change from 8 to 12 inch tires w/wheels. I would also like to upgrade the winch stand...

I have to replace my winch on my boat trailer, its rated for 2800 lbs. I cant find one thats the same the model number 5470A. I find some rated for 2600 lbs and 3200 lbs my boat is a 21 ft sun deck | You have a Shelby winch. Shelby is no longer...

I’m looking for a 2 speed winch for my boat trailer. Have a 21 foot boat on a roller trailer currently look at 315-w3200d would this be sufficient enough? Thank you for your time. | The 2-Speed Boat Trailer Winch with 20' Strap part # 315-W3200D...

We have a fabric bumper on the inside of our gunwale. I’m worried that the hook will not fit over the top. Does it have some give in it? | The JIF Marine # JIF53FR Gunwale Hook Ladder hooks are stainless steel tubing covered by vinyl to prevent...

Im looking to replace everything on my trailer from the bunk carpet the winch and the transom tie downs and just need some expert advice. The boat is 21ft and weighs 4,000lbs. The trailer is a tandem axel trailer and weighs about 1,200lbs....

Do you have a 315-w3200d with a cable instead of a strap? | We have a Dutton Lainson winch part # DL15440 which is very similar to the JIF you mentioned as it's a 3,200 lb capacity, 2-speed winch but we don't have a JIF version that has the...

Does the brake on the # 315-W3200D apply ON/OFF or will it DRAG to let the strap out continuously and slowly? | The brake is strictly an On/Off proposition. When it's in neutral, the strap can be pulled out easily without the handle turning...

does this come with the mounting hardware? | The 2-Speed Boat Trailer Winch with 20' Strap and Brake # 315-W3200D does not come with mounting hardware. This is the case with all of our winches. |

Hello, I am interested in the boat table - 28inch by 16inch... - Is it white? - i need it to come with a base that fits my boat - I have a Garelick table already - it has the kind of base where there are 2 bolts that go into slots - it turns,...

I have an 07 heritage trailer with a Shelby 5408b winch. The winch pin or stopperinch sheered off the other day. The boat has a dry weight of 3,700lbs. What winch and strap do you recommend for replacement? | The Jif Marine 2-Speed Trailer Winch...

I got the 142424 as a x mas gift and I was wondering if I could return it for a different one.what can u do for me... I was looking for a winch with power I would pay the difference ....thank you | We absolutely offer returns on unused items...

I want to confirm that this product is stainless steel and weighs 8 pounds. Those look like the specs for the aluminum model. Please confirm.. | The Jif Marine Folding Pontoon Ladder part # JIF38FR is indeed constructed of stainless steel....