!Monaco  x   >   !Shadow  x   >   Phoenix USA  x   >  

I regret my English is not very good I am a French Canadian, I want to know if it fit on my my bolts pattern is 5 x 4.25. THX | If the bolt pattern is indeed 5 on 4-1/4, then the # PXQT545BHS will not be a fit. The Phoenix USA QuickTrim...

I have a 2007 Jayco Seneca with 19.5 Alcoa wheels. I lost a rear hub cap. I see you have the replacement with #PXQ822R or PXQ820R. How do I know what size lug nut and stud I have? Thanks for your help. | The stud doesn't matter when it comes...

I understand that the 6 means 6 lug bolts but what does the 5 1/2 mean and what size lug nuts will this fit on ? thank you | You're correct. A 6 on 5-1/2 inch bolt pattern will have 6 lugs with a 5-1/2 inch bolt circle. That means that if you...

Hello, I am trying to figure out what size baby moon hubcap to get to fit on my 1970s horse trailer. I have a 6 lug, 15inch wheel. I think the hubcap needs to be about 10 inches in diameter and I do have a picture of the wheel attached. | It...

will hub covers fit on 6 on5.5 wheels with grease able hubslike bearing buddies or can you tall me how many inches between the flange against the wheel and end of cap | With 6 on 5-1/2 bolt pattern you will need to use part # QT655C. The QT655...

Will this fit an old 14 boat trailer wheel with bearing buddies? | As long as your 14' boat trailer has a 221mm (8.7", 22.1cm) hub bore with a 4-spline design then the Phoenix USA Baby Moon Hubcap - 8-7/8" Diameter # PXQ1400 will work great. If...

I have a 1969 traveleze dual axle. They have 15 inch 6 lug SPLIT rims on it. Does this cap still apply. It seemed I came up with 10.25 when I measured one of the other caps edge to edge in the center? Thank you for your time | The style of the...

I have a Gulf Stream Vintage Cruiser with 14 wheels and lost a baby moon hubcap. What do you have to replace that with. Thanks. | We do carry baby moon hubcaps for conventional wheels, the Phoenix USA Baby Moon Hubcap part # PX1307SS will fit...

Hey team, Im looking for some parts for 2012 Coachman Clipper Sport 126. It has 13 wheels and its a pop-up camper. 1. I need a leaf spring kit for this camper. Measuring eye to eye it looks like its 19.5, 4 count on the leaf spring, 1 1/8 thick...

Looking at part PXQT545BHS. Another customer shows they fit over the lugs on a Subaru, presumably with steel wheels and snow tires. Id like to do the same on a set of 16 steel wheels/lugs on a 2017 Accord. The pattern is 5X4.5, so that is not...

I’m assuming there’s a RH and LH and thats due to threads? Where can i get a socket or tool to fit this? | The Phoenix USA Wheel Center Cap part # PXQ2010 has right hand threads (threads run clockwise) but that does not mean there is a left...

What is the outside diameter where it touches the wheel? | The QuickTrim Trailer Hub Cover, item # QT545C, is designed to fit all trailer wheel and hub combinations with 5 on 4-1/2 inch bolt patterns, and is 6-3/8 inches overall diameter. |

I am looking for baby moons for my 2022 Yamaha Drive2 golf cart with factory 10 inch rims. Would you have anything that would work for me? | I took a look at what we carry, and while we do carry plenty of Baby Moon hubcaps, the smallest sized...

One more question I am getting ready to order a 8 1/4 inch hub cap with 10 lugs for my 2007 discovery motorhome. It’s for the passenger side does that mean I get a left or a right thread and what number would that be? Thank you very much. |...

I have the chevy kodiak 4500 with 19.5 wheels. I bought a set of the wheel caps and lost one of the lug nuts that hold the covers on. Would like to order a set of extra nuts. | Based on your photo, it looks like you have something like the...

1...I need a new shroud grey for 5th Wheel Pin Box for our 2011 Heartland Big Horn. Which one should I order for a proper fit? 2...I also need grey fender covers for the same camper. Which do I order for a proper fit? | We only carry pin...

Part # Qt665CLO There was a set of these on the trailer when I bought the trailer. I used the part # on the back of one of them but when I pull that # up it showing it fits a 16 in wheel . I have 15 in tires on my trailer is there a new part...

Are these deep enough to cover dexter axles with bearing buddies installed? | To determine if a Bearing Buddy would fit you will need to measure the Bearing Buddy. If it is less than 2-1/4 inches in diameter and sticks out less than 2-3/4 inches...

We recently lost our rear curbside/passenger side wheel hub cover on our 2009 freightliner Itasca Meridean motor home. The wheel is a 10 lug, the remaining hub cover seems to have all the same types of attachments that part #PXQ2020XL has. The...

Callico horse trailer 6 bolt wheels will the 6 bolt 5 1/2 fit all style wheels? I would a assume that they just snap over the lug nuts. I would also assume that the 5 1/2 would be measured from center to center. | You are correct the Quick...

QT545C Hub cover Will these work with bearing buddies on a 14wheel? | In order to determine if the Phoenix USA QuickTrim Hub Cover # QT545C will work with a Bearing Buddy you will simply need to measure it. If your Bearing Buddy is under 2-1/4...

Not sure what the axle diameter is. I measured the remaining hub cover on the motorhome and it measures about 8 1/4inch in diameter and about 6 1/2inch deep, will this cover work? It is for a rear wheel. | The Phoenix USA Wheel Center Cap...

My trailer wheels are ST 20/75R14. Will this ring fit these wheels? Make: 2013 Dutchmen 1268855 Model: Aspen Trail 1900RB 24 feet long. | For your 14 inch trailer wheels with a bolt pattern of 5 on 4-1/2 inch the Phoenix USA QuickTrim Ring...

What is CHN referring to Have cover with just QT765 | The CHN at the end of the part number for the # PXQT765CHN represents the color of the cover. In this case it's chrome. |