Can The Mounting Tabs Be Cut Off Of the Ladder Rack Bracket Kit For Packem Enclosed Trailer?
Hi, I’m interested in Ladder Rack Bracket Kit for Packem Enclosed and Utility Trailer Towers - Qty 2. I don’t need the tower because I would like to bolt these two bracket directly to a 2x12. My question is will the company make them without...
Hooks on Trimmer Rack Causing Wear On Equipment
The brackets have worn holes in the shafts of the weed wackers. What do you recommend to solve this issue before we start up in March 2021 | What a lot of folks have done is used flexible rubber tubing and slipped it over the hooks of the #...
How to Install the Pack'Em Rack Part # PK-6-OP1 on a Utility Trailer with Wooden Side Walls
Would I be able to install this on the back of my trailer? | In order to install the Pack'Em Rack for Open Utility Trailers part # PK-6-OP1 on your utility trailer, I recommend attaching the uprights to the wooden sidewalls of the trailer or...
Recommended Enclosed Trailer Ladder Rack for 6 x 12 Flat-Top Trailer
Hello, I am very interested in this ladder rack but my concern is that the ladder rack will sit too high on my flat top 6x12 trailer. I saw on the video on your site that they say that they cut the height down about 5inch and I am wondering...
Does the Pack'Em Wheel Tie-Down Kit PK-WTD Secure One or Two Wheels
PackEm Wheel Tie-Down Kit for Transporting Machines w/ Wheels - 30inch Tall Tires - 2,000 lbs. This product, it says kit. Is there two of these inside so I can strap both tires down or is there only one? Curious because I need to make sure two...
What is the Weight Capacity of the Pack'Em Ladder Rack Bracket Kit for Enclosed Trailers?
Hello, i like this PackEm Ladder Rack Bracket Kit for Enclosed Trailers Item # PK-28B. What is the weight capacity of this? | The Pack'Em Ladder Rack Bracket Kit for Enclosed Trailers item # PK-28B has a maximum weight capacity of 200 lbs...
What Is The Static/Dynamic Weight Capacity Of The Pack'Em Ladder Rack PK-28B
PackEm Ladder Rack Bracket Kit for Enclosed Trailers Item # PK-28B What is the static weight vs dynamic. My roof top tent is 183 so should i put two racks 4 Cross bars What is the statix weight of the bars. I see 100lbs per bars 200 total...
Is Adapter Needed for STIHL BR700 Blower with Pack'Em Rack for Open Utility Trailers
Thinking about buying your pack-em rack, item number pk-6-0p1. The only question I have is about the blower. I have a stihl br700 blower. Do I need any extra to parts to support my blower with that rack system? Thank you | I spoke with my contact...
D-Ring Diameter of Stake Pocket Anchors T55B and PK-SPTD
what is the diameter of the d-ring? also what is the diameter of the d-ring on product PK-SPD? | The D-ring of the Stake Pocket Anchor part # T55B is 3/8 inch. The diameter of the D-ring on the # PK-SPTD is 7/16 of an inch. So basically it...
Recommended Bolt Size for Installing Packem Trailer Racks
What size bolts so I have them when it gets here | I checked with our contact at Packem and he informed me that they usually recommend using 5/16 x 1-1/2 bolts that are grade 5 or 8 with flat washers and matching lock nuts to install their racks...
Is Pack'Em Rack for Open Utility Trailers A Universal Rack
Are they universal, I have deferent brands of blowers and trimmers. | The Pack'Em Rack for Open Utility Trailers, part # PK-6-OP1 is a universal design and will work with many different model of tools. Adapters are required for certain model...
Could Trimmer Rack PK-6S2 Carry Redmax Trimmer and Edger
Can I hold a redmax weed whip and redmax edger with one of your setups | Yes you could hold either of the Redmax trimmers with the Pack'em trimmer rack for utility racks part # PK-6S2 that you referenced. |
Will Trimmers Flip Upside Down During Travel with Pack'em Trimmer Rack
Will the trimmers stay in place? It looks like there is nothing preventing the trimmers from turning upside down leaking gas everywhere. | The Pack'em Trimmer Rack # PK-6S-6S2 that you referenced actually features a padded piece on the front...
Is There a Removable Shovel Holder for Open Utility Trailers
Is there a setup similar to the 2 trimmer rack with the removable stallions for the shovel rack? Can you buy the stallions and then add the cross racks to hold the shovels so you can remove the rack just like the trimmer rack? | The only type...
Can Rack Em Ladder Racks be Shortened
Is the following part able to be cut shorter to use for only 1 ladder? I can only fit 28inch on my truck. Overall Length of PackEm Ladder Rack for Exterior Side Wall of Enclosed Trailer # PK-28WL2-BM If not do you sell a shorter one for one...
Straps For Securing an ATV/UTV to Trailer for Towing
Looking at item 34414 Erickson retractable Ratchet straps 2” x6ft. Can these be permanently mounted on my aluminum trailer to tie down the front of a side by side UTV. Approx. 1300 to 1400 lbs. | The Erickson Re-Tractable Ratchet Straps # 34414...
Pack Em Trailer Rack to Carry 3 Trimmers and 2 Blowers
Can you offer a rack that will hold 3 trimmers and 2 blowers? | Best option we have for that would be the Pack Em Rack part # PK-6-OP1 which will cover the 3 trimmers and one of the blowers and then use the # RA-39-BMH for the other blower and...
Blower Rack Adapter Recommendation for the Pack'Em Rack for Open Utility Trailers with a Stihl BR450
Do I need an adapter for a Stihl BR 450 C-EF for the blower rack on the combo trimmer, blower, cooler, string rack? | Yes, you would still need to use the Stihl Adapter part # RA-STIHL with your Stihl BR450 C with the Pack'Em Rack for Open Utility...
Is Pack'Em Wheel Tie-Down Kit For One Or Two Wheels
this says one kit is it for one wheel or two wheels | The Pack'Em Wheel Tie-Down Kit for Transporting Machines w/ Wheels, part # PK-WTD is designed to secure one tire in place on a truck bed or deck. |
Adapter To Hold Stihl 350 Backpack Blower On PackEm Rack For Open Utility Trailers
Does the stihl 350 blower require an extra part to hang up on the rack and if so where can i purchase that part? Thanks. | The Pack'Em Rack for Open Utility Trailers, part # PK-6-OP1, is designed to hold 3 trimmers, a blower, a cooler rack and...
Easy to Use Ladder Rack Options for an Enclosed Trailer
Im looking to install a ladder rack on an enclosed trailer that can tilt or down so there is no need to climb on top of the trailer to secure it. Do you have anything like that? | I do have an easy way that will allow you to carry multiple...
Will Trimmers Bounce Out of Rack'Em Trimmer Rack for Enclosed Cargo Trailers
I like the designed but I'm a little nervous about the trimmers bouncing around on the hooks since my employees will be driving the trailer around. Do the trimmers stay put mostly or is there a way to strap them down inside the hooks? | The...
Distance from Pin Hole To Bottom of Plate on Brophy Stake Pocket Tie-Down Anchors
I have a question about PK-SPTD. What is the measurement from the pin hole, to the bottom of the steel? I have a trailer where one set of stake pockets are impeded by the frame below it, so I have short clearance. | The distance from the top...
Trailer Stake Pocket Anchors & Ratchet Straps For ATV
Hello. Do you have any recommendations for a retractable ratchet strap that will fit in the stake pockets of a trailer to easily secure a 1,700 lb SxS? | While there aren't any ratchet straps that fit directly in stake pockets of a trailer,...
Filter Your Search
Contact and Help