!LHS  x   >   !Justy  x   >   !Sea-Doo  x   >   Durabilt  x   >  

Trying to store long stock items up towards the ceiling of the trailer using board holders and 2x4s. These items will be unloaded first, and the beams moved to create head-space while unloading the rest of the trailer. My original plan was...

What is the bolt diameter see circled portion of bolt inside of the jaws. Customer is wanting to attached grade 100 to the bolt, so we need to know bolt diameter in order to purchase correct size of chain so that bolt will fit through the chain...

Havent verified yet, but dont believe that these chains are long enough to reach from the CAB-C5G to the loops on a 2017 Ram 3500 with factory setup. If not, what do you recommend? | I went ahead and reached out to Convert-A-Ball, and they informed...

I have a 2013 f150 super crew trailer hitch with angled oval safety chain openings that are a pain to connect to. I have a 7,000 lb travel trailer. What size Hammer Lock coupling link would be best and would fit the hitch oval described above...

On the #DU84GR Chain Link the stamped WLL is 8.2T - 16,400lbs right? not 18,100lb per description Thanks | I was able to verify the Durabilt Hammerlock Coupling Link for 5/8" Chain # DU84GR does have the 8.2T stamped on the link for the WLL....

Do you sell the handles and binders for this separately or will I have to get them as a set. | We do sell the Handle # DU73MR and Binder # DU33MR separately from the Durabilt Ratchet Chain Binder w/ Removable Handle # DU57GR. This will allow...

Can these be used directly connected to cargo on the short end with the chain looped through a d-ring or stake pocket and hooked back to itself? Thanks | Yes, you could attach the Durabilt Ratchet Chain Binder w/ T-Handle and Chain for 5/16"...

How much will this binder close up? | The Durabilt Ratchet Chain Binder # DU32MR will close up 8" from 28-1/2" overall length to 20-1/2" overall length. It is designed to fit chains with 5/16" to 3/8" thick links. |

Would this work as a cable tightener for a dock? In Missouri we use cables to hold our docks in place and the cables are alway loosening off. There is a lot of waves and movement so I am not sure this would be the best thing for the ratchet....

What is the take-up length for this load binder? | The take-up length is 8". The distance when closed is 17" and when opened is 25" on the Durabilt Ratchet Chain Binder with Clevis End Fittings item # DU63MR. |

What size of these durabilt connectors do you recommend for my 2021 Silverado 1500? The chain loops aren't terrible, but I tow often enough I'd like the connection to be quicker and easier. Thanks! | I recommend picking up the Durabilt Safety...

I have a Ford F-150 with the factory hitch. The opening for the tow hooks to attach is a 1 x 2 inch oval slot. Would the clevis hook for this chain fit in this slot and be able to move freely or would I need to add a shackle? If I need...

The product specs state “Take Up: 8”. The video transcript states “The take-up length is about six inches.” 1 Please advise exact take-up length OR 2 both the fully extended and collapsed lengths. For my particular application 6” extension...

I want to replace my safety chains on my Rockwood tt. Being they are factory welded on tongue, my plan was cutting old off and using hammerlocks to attach to welded U. However not sure what size would fit into 5/16inch chain link on tongue end?...

Is it safe to use the binder in compression and what is the compression load limit? | The Durabuilt Ratchet Chain Binder # DU63MR is not going to be rated to be used in compression, you'd instead want to check out the Durabilt Ratchet Chain...

Hi, Will the links on the Durabilt Transport Chain with Grab Hooks - 1/2inch Chain - 10foot Long - 11,300 lbs fit around the bolts on the Clevis end fittings of the Durabilt Ratchet Chain Binder with Clevis End Fittings - 13,000 lbs? Thanks...

I'd like to use the 337B03822SC chain for my travel trailer and while that snapper piece is a nice touch, but truck safety loops are hard to get at with that pin. Do you have an easier way to connect this to my truck? Trailer weighs 10,000 so...

regarding Item # DU96MR - are these sold per each or per pair? Thanks. | The Durabuilt Hammer Lock Coupling Link for 1/2" Chain # DU96MR you mention, is sold as a two halves equaling 1 link, weighing 1.4-lbs total. I have also attached a review...

Looking for: 3/8 X 10ft w/2 grab hooks. About 6,000 to 7000 lb load | Although we do not have an exact match, I do have a few good options for you. The following options are the closest to matching your requirements: -Durabilt Transport Chain...

Is the 12,000 lb rating for one or both of these? | The 12,000 lb weight rating of the Durabilt Safety Chain Connectors # DU35QR is for both of them. |

I am wondering what the size of the bolt is on each end of the binder | The bolt head and nuts on either side of the Durabilt Ratchet Chain Binder item # DU63MR are 1". |

Hi there, what is the best product/piece to reduce the size of my 1/2 d rings on my trailer. I would like to hook my 3/8 binders to the d rings but of course currently, the sizes do not match. Shackle ? Quick link ? What is the legal way to...

I need a 1/2 to 5/8 3 hook binders I need 10 do you have them | The only 1/2" to 5/8" chain binders we offer have two hooks, the 13,000 lb-rated Titan Chain Ratchet Type Load Binder for 1/2" - 5/8" Thick Chain # TCRB13 and the 18,100 lb-rated...

Can you assist me with selecting the appropriate hammerlock for my 2018 Ford F150 Lariat Super Crew Cab V8 pulling a 2022 Grand Design Imagine 2500 RL GVWR 7,500lb and hitch weight 581 lb? | It looks like the most your 2018 Ford F150 Lariat...