!LHS  x   >   !Grand Tour Elite Camper  x   >   !NX 450h  x   >   1967  x   >  

HI! I have a 1967 VW double cab truck that we have installed a 1 1/4 inch hitch with Euro style 1 7/8 ball mount. We used 1 1/4 inch solid round stock but I need to have it extended approx 8-10, to clear the engine lid and raised 6. see pics...

Looking to change out an old Flowmaster exhaust and replace with Dougs headers and your magnaflow stainless steel system. Im just not sure if I should install the larger diameter exhaust or smaller. The article regarding pipe diameter states...

Will the ToyLok 18foot Retractable Cable for Pickup Stake Pockets work in conjunction with the Truxedo Tonneau Covers? If not, do you have any product that will help lock cargo under this tonneau cover? Thx.1967 Chevy C-10 bed management system...

How do you wirethe vehiclefor a 7 way and elec brakes i tried too do it when you step on the brakes trailer lights go dimm ,turrn on a blinker both trail. Lighfts blink but are dimm i have running lights in trailer with no lights on truck ...

Hello. I am looking for a hitch to fit my 1954 F250 truck. I know you dont have any listed for that year. My frame is 34inch wide, and I need it to at least 4inch from the bottom of the frame to the top of the . 6inch would clear the bumper...

Need to install brake control on 67 ford ranchero really like install kit with module in it can you please send me a total workup from scratch | To install a trailer brake controller like the Prodigy P2 # 90885 in your 1967 Ford Ranchero you...

I plan to put a hitch on my 1949 Ford F3 and I see that your Drawtite 41504 hitch is adjustable for 2 different frame widths. What are they? Thanks | The Draw-Tite Trailer Hitch Receiver # 41504 is a custom fit hitch for specific trucks. The...

Best place to mount the transmission cooler on a 1967 Galaxie 6.4L with AC? | The best place to mount an automatic transmission cooler such as # D12904 on your 1967 Ford Galaxie or any vehicle is in between the vehicle grille and the AC condenser...

I tow a 11000 - 13000 lb boat with a 2015 gmc 2500 and need more lift to bring the torsion axle trailer to level towing height and Im concerned about hitch fracture safety. I am looking at the 2.5inch Flash Solid Steel Adjustable Ball mount....

Will this fit a 67 bug? Or any suggestions on a better fit? | If your 1967 Volkswagen Beetle has a 1-1/4 inch trailer hitch receiver at the back then you could use Thule Camber bike carrier # TH9058. If you do not have a trailer hitch you will...

Can you tell me the exact backspacing ? | The backing spacing of the Dexstar Conventional Steel Wheel part # AM20304 is 3.25" plus the lip for a total of 3.50". The wheel is 5.50" wide with a .50" offset which is what you use to determine backspacing....

On my 1967 Ford F-100? I do not have any connectors, so it will need to be hard wired into truck electrical system. | Do you already have a fully functioning 7-Way connector at the rear of your 1967 Ford F-100? If not then you will need to install...

I have a 67 chevelle aluminum radiator bb 427 core dia 22-17 wanting electric fans and shroud to fit what I have also has long water pump I have 2 and five eights from pulley to core need something low profile?? | For your 1967 Chevelle I recommend...

can it be used in a boat where I have a starting battery and a separate battery for my accessories. | Yes, the Deka Battery Isolator part # DW08770 can be used on a boat to separate the starter and auxiliary battery but you would need to mount...

Hi Im looking for 14 5x4 small bolt pattern wheels/rims. I was wondering if you had 5 of that size available? | The standard bolt pattern for 14 inch trailer wheels is 5 on 4-1/2 inch like the part # AM20364 which we have a lot of options for....

I need to confirm the outside width of 14048 hitch? | The Curt Trailer Hitch Receiver # C14048 is designed to fit cab and chassis model trucks which all have a frame width of 34 inch to 34 inch measured on the outsides of the truck frame. This...

looking for a brake controller for my 1967 Chevy Biscayne wagon | For a great brake controller for your 1967 Chevrolet Biscayne Wagon, I recommend the Curt Echo # C51180. Not only is the Curt Echo smart phone controllable, it has a super easy...

I have a 1967 GMC C2500 8ft. bed, 8 lug W/power disc front brakes conversion, Dana 60 1 ton rear end, GWV 7500lbs trk ID tag. Do you have a frame tie down brace system to fit to hold down a truck camper? or ideas? | There aren't any frame...

I need a bikini top for my CJ7. 1986 Jeep. Is there such an animal on the planet? | Yes, there is. I checked with our vendors and the Bestop Strapless Bikini for Jeep item # B5251801 is the correct one for your 1986 Jeep CJ7. |

Hello, Can I bolt this flat plate to the top of the frame? What is it rated by itself? Thanks Can this product pull a trailer with just the 6 grade 5 bolts? | Curt says the Gooseneck Flat Plate # C65500 can be installed to the frame rails...

Do these inside the spring air bags raise the veh. in the rear up to 3 in. if desired ? Thanks inch air lift 1000 drag bags | The Air Lift Vehicle Suspension Kit for the 1967 Pontiac GTO, part # AL60844, is a correct fit for the 1967 GTO (as...

Have a 1967 International Travelall 1200 B which is a 4x4 3/4 ton panel truck. Would like to have a hitch similar to the Curt p/n 15320 that I installed on my Chevy because I have a spare tire mounted underneath the rear similar to the Chevy...

Will this kit work on a 1967 Chevelle SS with a 502 BB? | According to MagnaFlow, the Stainless Steel Crossmember-Back Exhaust System, # MF15897, will fit your 1967 Chevelle SS. This kit is a cross member back exhaust kit. My contact at MagnaFlow...

Hello, could you provide width, length and height of 20000-92230 Do you have a rear truck bumper 78-80inch length? | The Westin # 20000-92230 is 74" long x 8" tall x 8" wide and comes with custom mounting brackets for a 1967 Ford F-100, F-150,...