!Designer Camper  x   >   Clean Seal  x   >   Dutton-Lainson  x   >  

Is this the same part as Dutton-Lainson 13889 tongue coupler | The Dutton-Lainson Trailer Coupler part # DL13835 is a direct replacement for the older Dutton-Lainson Trailer Coupler part DL13889. They are not the same but this what you would...

it this winch waterproof/sealed so I can use it on my ATV | According to our contacts at Dutton-Lainson, the # DL24870 can be used in wet environments such as boat trailers or ATV's. The winch can withstand splashing, but immersing it in water...

What is the diameter of the strap drum? I know it is designed to accept 20 foot of 2 inch strap. I am attempting to compare this trailer winch to my existing old winch. I believe I will be purchasing a new unit from you as my new 2x20 foot strap...

I need two hand winches to replace the ones I have on a cattle chute. I am looking for a right and left handed winch with 2500 lb. capacity and will accommodate a stainless steel cable. I am checking on the bolt pattern, but mainly need to...

Would you recommend this electric winch for a 18 foot Stingray boat that is used mainly in saltwater and stored outside? | The Dutton-Lainson TW4000 StrongArm Electric Winch # DL25200 is the one I recommend for your application. It has a strong,...

I recently purchased some wheels and tires and was very pleased with what I received. I have a jet ski trailer made by Zieman and I damaged the tongue jack caster. Its not a 2 inch tube and the wheel is removable with a twist and downward...

Hi, How much does the DL21741 weigh ? I guess each piece ? I have MS and looking for a way to load kayak into truck bed .These look like a good possibility. Thanks | Each of the roller assemblies of the # DL21741 weigh 19 lbs. |

I own a Malone MicroSport XT trailer and am looking at getting a keel roller and winch. Im not looking for something that supports a ton of weight, for this will be used for a long 13.5 kayak. Just something to 1 hold the stern forward and 2...

I need to order a couple extra Hitch ball mounting plates | You will want the Dutton-Lainson Ball Adapter Plate for StrongArm SA Series Electric Winches # DL24053 which has a zinc plated TUFFPLATE finish. The bolt pattern will match up so it...

Can this winch be anchored to a tree with a ratchet strap? | Dutton-Lainson doesn't recommend installing a hand winch in that manner. The # DL15440 3200 lb capacity hand winch is meant to be firmly bolted to its mounting surface, and installing...

I have a 26 ft sea ray which is being pulled onto a carpeted trailer. what electric winch would you recommend | For your 26 foot Sea Ray I recommend the Dutton-Lainson StrongArm Electric Winch # DL25215. Based on my research your Sea Ray likely...

I ordered DL21740 bunks. I have a 16 ft. bass tracker pro with 30 HP mercury. My bunks are 7 ft 3 in. Will the bunks i ordered be large enough to support my boat? If not what should i do? | What I recommend is to use 2 sets of the roller bunks...

Could a TW4000 be mounted on a jet dock? | The Dutton-Lainson TW4000 StrongArm Electric Winch part # DL25200 is primarily designed to be mounted to a boat trailer but I see no reason as to why you could not attach one to your jet dock. In order...

Can the height on this jack be adjusted while it is bearing weight on the jack? Also, What is the pin at the bottom of the jack used for? | I spoke with my contact at Dutton-Lainson, the manufacturer of the Bolt-On, Drop Leg Trailer Jack,...

can you free spool line off this winch or do you have to unwind it with the handle? | The winch can be released so you can pull line off. The winch has a hand brake for manually-controlled load release. |

Have Winch DLX 1900 and need a shorter handle for it. Will the following part fit? DL5144639 | The DLX 1900 is our Dutton-Lainson Hand Winch # DL17042. The Replacement Handle for Dutton Lainson Winches # DL5144639 which is 6" long and is the...

Are the rubber end nuts you sell a viable replacement for pal end nuts those on each end of a roller shaft? | A lot of people use the rubber end cap # DL21558 but I would prefer to use a pal nut myself because it seems more secure to me since...

Good Morning, I have a 2008 Extreme Boat Trailer for my 2008 Malibu VTX boat. The Trailer Came with a Dutton-Lainson Model DL1402A winch that has failed. I would like to upgrade to a better quality winch but I dont want to re-drill holes...

Upon purchasing a pop up camper I didnt crank my trailer jack up enough and bent the bottom support on my driveway approach. It looks standard enough on the mounting, but noticed you list some replacement jacks for agriculture and/or commercial...

WE HAVE A 1992 FEATHERLITE HORSE TRAILER THAT CUSTOMER WANTS TO REPLACE THE SIDE ENTRANCE DOOR. THE CURRENT DOOR IS WOODEN BUT NEED A METAL DOOR. OPENING IS 31 X 73 DO YOU HAVE ANYTHING WE CAN USE? | While we do carry Hinges # LC95VR, Latches...

What size and kind ofroller do this bracket take? | For a roller bunk bracket designed for roller bunks you would want a Boat Trailer Roller Bunk Bracket # DL21742. If you wanted a set of roller bunks for this bracket I would recommend the Boat...

Will this bracket accept 1/2 inch u-bolts or is 7/16 required? | The Boat Trailer Roller Bunk Brackets # DL21742 do require 7/16" U-bolts such as # 7163183UB. The bunk brackets are designed to be used with Roller Bunks # DL21740 or # DL21741. |

Electric winch handheld remote to pull a handicap manual foldable light weight29 pounds wheelchair into the back driver side chair area. I have a Toyota Highlander 2002. I am here being the backseat removed to facilitate this better. Also what...

Looking to pull my seadoo on a beach dolly fat tires from the water, through 20ft of sand and up my grass hill. The seadoo and trailer weigh about 1200lbs. There is a fairly steep incline of about 25* for about 30ft. Any recommendations? | Winch...