How To Center The Steering Wheel After Installing Roadmaster Steering Stabilizer On Class A
After mounting this what adjustments are needed to center your steering wheel with this. | The only way to center the steering wheel is to test drive it after installation. If the vehicle is pulling after you have installed the Roadmaster Steering...
Replacement Waste Valves for a 2001 Winnebago Rialta
Need waste replacement valve for Rialta 2001 Looked at your parts but none appear to match our part. Any suggestions. | If you can send me a photo of your waste valve setup then I may have an option for you but I don't know what you have now....
Yakima EXO SwingBase 2 Tier Swing Away Dimensions For Clearing Rear Door on Camper Van
From were it s into the hitch to end ? Length . Has to clear swing door on van | The Yakima EXO SwingBase 2 Tier Swing Away Hitch Extender # Y82VR is 29" from the center of the hitch to the locking handle on the base. The locking locking handle...
Will The 16 Inch Wheel Masters Wheel Covers Fit My 2WD Ford F-350?
Will that set of 4 fit 1997 ford f350 2 wd? There 16 inch and 8 lug steel wheels but he said the front would need to be 3 inches deep and rear would need to be 4 inches deep? | I went back into the warehouse and measured this product myself....
Rails for Mounting Reese 14K Hitch to 1997 GMC 2500
I bought a older small 5th wheel camper, i got the hitch with it, the hitch is a Reese 14 K clasic Hitch, however I do not have moiunting rails. Are the rails still availiable, or will the rails on the 16k fit, i am putting it on a GMC 97 2500...
How to Locate the Brake Switch Wire on a 1997 Chevrolet C/K Pickup
1997 chevy 3500CK truck, installing a brake controller. I have all the other wiring connected, but im having a hard time locating the brake wire so I can connect it to the controller. any info would be helpful. | To find the cold side of the...
Parts Needed to Flat Tow 1997 Ford Mustang
My question is: I have a Blue Ox tow bar system and decided to tow my1997 Ford Mustang behind my motor home.I looked into your Roadmaster Crossbar-style base plate kit, code: 466-1 and the adapter for Blue Ox tow bar to Etrailer Classic Base...
Suspension Enhancement For 1997 Nissan Pickup Lowered by 4 Inches
Hello, I have a lowered 97 nissan hardbody pickup. I need helper springs or air bags for the truck to help when loaded. I have 4 inch blocks in rear. Will the Timbren Jounce work? How much space is needed between frame and axle? Reading it sounds...
1997 Ford F-350 Trailer Brakes Locking Up When Harness Is Plugged In
I have a Gooseneck horse trailer that we pull with a 97 F-350. Never had any trouble with the trailer brakes until yesterday. When I plugged in the harness the brakes immediately engaged. I found the ground wire on the truck battery was loose,...
Will Timbren Suspension Enhancement for 1997 Chevy Suburban Affect Ride Quality
1997 Chevy suburban will this kit affect my ride? want to stop some of the wear and tear | The Timbren Rear Suspension Enhancement System # TGMRSB4 for your 1997 Chevy Suburban can affect your unloaded ride quality, but mostly on roads that...
Will the Draw-Tight Activator IV fit a 1997 Ford F-150
Checking to see if a Draw-Tight Activator IV will fit a 1997 Ford F-150 light duty. Thanks | Yes, the Draw Tite Activator IV brake controller part # 5504 will work well in your 1997 Ford F-150. If you have a factory 7-way at the rear of your...
What Size Ball Shank Diameter and Length Works with Reese Sway-Control Bracket RP26003
Ive read that this bracket adds a 1/2 inch to the ball mount. Which 2 inch ball has the correct shank length to compensate for the increased ball mount? And, which diameter shank? | The ball hole diameter on the sway control bracket # RP26003...
Installation Measurements for Reese Custom Bracket # RP50082 on 1997 Dodge Ram 2500 Pickup
what is the distance measurement from edge of bed to edge of bracket on 1997 dodge 2500 truck | The Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches that you referenced, part # RP50082, is designed specifically to fit Ford...
Anti-Sway Bar and Steering Stabilizer Recommendations-1997 Fleetwood Bounder on Ford F-53 Chassis
LOOKING TO ADD YOUR SWAY BAR FOR A BETTER RIDE ALSO SINCE IT IS A 97 THINKING OF NEW POLY BUSHINGS IN THE FRT AND A NEW STEERING ABSORBER ??? SHOCKS ARE GOOD. | The Roadmaster # RM-1139-143 is a fit for your Fleetwood Bounder on a Ford F53 chassis,...
Recommended Trailer Hitch for 1997 Chevy C3500 with Service Body
Needing to know what hitch I can install on a 1997 C3500 Chevrolet truck with a Knapheide utility body. I have not measured yet, but guessing I need a hitch for a 10 inch bumper? Thanks, | I do have some great trailer hitch options for a...
Will Curt Class IV Receiver C14081 Fit a 1997 Chevy Pick Up
1997 Chev pickup, extended cab, step bumper, factory tire mount under box. | As long as your 1997 Chevy pick up is equipped with the factory step bumper, the Curt Class IV Receiver, part # C14081 will indeed fit. We also offer some other items...
Correct Blue Ox Avail Tow Bar To Roadmaster Direct-Connect Base Plate Kit Adapter
I need an adapter to connect the Roadmaster 458-1 mounted on a 97 Ford F-250 Supercab 4x4 diesel to a Blue Ox Avail tow bar BX7420. The QandAs fir the base plate discuss using a BX88185 adapter. Im confused however because the Blue Ox Avail...
Will the Blue Ox Patriot Work With A Backup Camera On a 2.4 GHz Frequency
need the owners manual for both these units to see which is the best for my installation. Have downloaded the installation manuals but need the info available in the owners. Using wireless rear cameras at 2.4 ghz. concerned about interference...
Will The Curt Trailer Hitch Receiver # 14001 Fit With Aftermarket DMI Bumper on 1997 Ford F-250?
i have a 1997 ford f 250 hd with a DMI SPRING loaded bumper/ hitch. I removed the center spring hitch s it always was to high for trailers, Will this 14001 bolt under this DMI bumper that remains | You are going to have roughly 8-5/8" from...
Everything You Need to Carry Everything on a Roof Rack on 1997 Toyota Camry
Hi team, I need an aerodynamic, aluminum roof rack system that’s easily removable and fits a 1997 Toyota Camry with a naked roof. I’ll be carrying 2 kayaks. But I also want to be able to carry furniture, boxes, bikes, a mattress just all kinds...
Will the TruXedo TruXport Soft, Roll-Up Tonneau Cover Fit a 1997 Ford Ranger Splash
I have the ranger splash with the narrow bed 48inch Will this item fit? | The ETruXedo TruXport Soft, Roll-Up Tonneau Cover part # TX247101 is a fit for a 1997 Ford Ranger with 6' Stepside Bed. It looks like the Splash models came with a 6'...
Are Westin Signature Series Nerf Bars for a 1997 Ford F-250/F-250 Still Made
Do you carry the Westin 25-0620 nerf bars | The Westin Signature Series Round Nerf Bars 25-0620 have been discontinued (we did carry them) but we do have some other options if you're looking for nerf bars to fit the 1997 Ford F-250/F-350 you...
Where Does The Black Wire On Replacement Wireless Remote Control # K2WR100 Attach?
what do you connect the black wire on the remote box to?? Battery positive or negative? | The black wire on the Replacement Wireless Remote Control # K2WR100 should be connected directly to the negative terminal of the battery. |
Adding 7-Way Trailer Connector to 1997 Winnebago Built on a Ford E-350 Van Chassis
Can you tell me what T-One connector I will need for a 1997 ford e 350 winnabago class c motor home that will have a 7 pin connector. All I see is four flat? | If the 1997 Winnebago on the Ford E-350 chassis did not come with a factory trailer...
Filter Your Search
Contact and Help