Fit of Curt #12064 on Challenger SXT V6 2015
Hi! Can you provide a picture of the Curt #12064 installed on a 2015 Dodge Challenger? The new rear bumper fascia is different, and I hope it look similar to the Charger 2014. Thank you for your help | I spoke with my Curt representative about...
Recommendations for Carrying 3 Bikes with a 2010 Dodge Challenger
I have a 2010 Dodge Challenger I need a 3 bike rack. I cant find my model on your list. Do you have one with locks for my vehicle?? Thank You, | I do have a solution that would allow you to carry 3 bikes with your 2010 Dodge Challenger, but...
What Types of Jacks do the Bulldog Powered Jack Motor Kits Fit
I have a goose-neck trailer with two 10000lb capacity jacks the jack on the right has the 2 speed gear box mounted on the right side between the trailer frame and jack. will I need to get into the two speed gear box to install the powered-Drive...
Cross Bar Recommendation For 2018 Ford F-150 With Truckhero Elevate TS Rails
I am looking for cross bars that will fit on the roof of my 2018 F-150 super crew cab and with the right fit kit could also be installed on the Truckhero Elevate TS rails I have on my truck bed. I appreciate your recommendations. | For your...
Recommended Platform Bike Rack For 2015 Dodge Challenger With Draw-Tite Traielr Hitch 76145
Hi, Im having the Draw-Tite Receiver Class III installed on my 2015 Dodge Challenger in a few weeks. I want to buy a platform bike rack. Do I need to be careful about which rack I buy since my concerns are: 1. I want to make sure the rack...
Recommended Winch to Replace Older Fulton 945 for Use on a Boat Lift
I have a boat lift with a Fulton 945 winch that does not unwind. I need to repair or replace it. What would I need for either of these options? | I spoke with Fulton and parts are no longer available for the Fulton 945. That's a pretty old...
What is the Height of the Draw-Tite # 76145 on a 2016 Dodge Challenger for Choosing a Ball Mount
Hi, I need to know what height the receiver is from the ground when installed on a 2016 Dodge Challenger, so I can a suitable ball mount for my trailer. | When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver # 76145 on a 2018 Dodge...
Availability of a Trailer Hitch to Fit a 2016 Dodge Challenger Hellcat
Will this hitch fit my 2016 Challenger Hellcat? If not is there another hitch that will? | The Draw-Tite Class II Trailer Hitch Receiver, # 36548, will fit a 2016 Dodge Challenger if your vehicle does not have the quad-tip exhaust. Since your...
Will Adding Shorty Headers and Exhaust w/o Catalytic Converters Increase Power of 2013 Challenger
im putting shorty headers and cat back system on my 2013 challenger with 5.7 my question is should i leave stock converter on and my cat back comes with resonators. how much extra hp and torque could i get out of doing away with stock converter?...
Ball Shank Diameter, Rise, Drop, and Length of the Ball Mount that Comes with Trailer Hitch # 12240
what is the rise/ height? | The ball mount that comes with the Curt Trailer Hitch, # 12240, has a rise of 2-5/8 inches and a drop of 3-1/4 inches. Its overall length is 7-1/4 inches. It accepts a ball with a 3/4 inch diameter shank. I have...
Solution for Trailer Hitch on 1969 Dodge Dart
Any chance you have a 1.25 or 2” hitch that will fit a 1969 dodge dart? | I do have a solution, but there are no custom fit hitches available for a 1969 Dodge Dart. What you can do is take the # E17 to a local fabricator and have them fashion...
Is Trimming or Cutting Required to Install Draw-Tite Trailer Hitch 36548 on a 2012 Dodge Challenger
is there any cutting needed on the bumper or under the car, to instll this? | I have included a link to the installation instructions for the Draw-Tite trailer hitch # 36548. There is no mention of having to cut, trim, or drill anything for...
Parts Needed to Add Electric Drum Brakes to Rear Axle of Tandem Axle Travel Trailer
Hello, I am looking to replace my current electric brake assembly with AKEBRK-35-SA on my tandem axle travel trailer. My front axle has brakes that are worn, however the rear axle does not have any brakes. Apart from wiring, what all do I need...
Trailer Hitch Availability for a 2016 Dodge Challenger SRT
RE: Curt C13093 Please confirm that it fits 2016 Dodge Challenger SRT. The installation instructions indicate that fitment is for Charger and Chrysler 300. | Yes, the Curt hitch part # C13093 that you referenced has been confirmed as a fit...
Recommended Trailer Hitch for an RV Towing a Motorcycle Trailer
I have a ram 1500 ecodiesel and tow a 30 ft trailer about 6k lbs. I would like to either find away to put my harley in the back of 6.5 bed or attach a small mc trailer to travel trailer | The Curt Adjustable Width Trailer Hitch Receiver for...
Power and Muffler Style MagnaFlow Cat Back Exhaust for a 2013 Dodge Challenger with 5.7 Liter Hemi
will my stock catalitic converters rob any of the extra power with this system. and are the resonators on this system piped straight through. what kind of real gains in hp and torque can i expect with this system on my 5.7 | A MagnaFlow cat-back...
Most Concealed Trailer Hitch Receiver for 2016 Dodge Challenger SXT
I am searching for the most concealed trailer hitch available for a 2016 Dodge Challenger SXT V6. I would like the design to be such as that the hitch receiver is welded to the underside of the hitch crosstube that can be mounted up and behind...
Replacement Exterior Ladder for 2000 Damon Challenger RV
I have a 2000 Damon Challenger Rv. I have broken make ladder. I cant find a replacement ladder anywhere. Im also unable to locate a universal ladder in this size the ladder is 104inch long Measuring from the top of the Horizontal pole to the...
Can Remote for Fantastic Fan 12-Volt Fan Stop Lid When Only Halfway Open
I have a Remote control, but it doesnt stop half way. Either the roof vent is all open or all closed. I want to get it half open with the fan running. The only I could stop the roof vent is by taking the fuse out when it is half was up. Is...
Trailer Hitch Receiver for 2018 Dodge Challenger
Will this trailer hitch fit on a 2018 widebody Dodge Challenger Hellcat? | The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13236 is a confirmed fit for the 2018 Dodge Challenger, but unfortunately there is not a hitch fit from...
Parts Needed to Flat Tow a 2014 Dodge Challenger
do you have a tow bar that would fit a 20014 Dodge Challenger and wouldnt have to cut holes in front bumper cover thanks | We do have a base plate kit confirmed to fit your 2014 Dodge Challenger that won't require cutting holes in the front...
Trailer Hitch Tow Capacity Different than Vehicle Tow Capacity, 2011 Dodge Challenger with 3.6 Liter
Hi i just wanted to ask for the base challenger 3.6 engine the site states the max towing weight 1000lb did you guys find this to be the case with either charger or challenger,did you tow anything bigger basically can i tow 3500 lb with challenger...
Trailer Hitch Recommendation for a 2015 Dodge Challenger
Looking at the video for the installations of past year cars, it seems that it is a bit different for a 2015 challenger. Can you provide details for the new year and also any jack points ? | The Curt hitch part # C12064 that you referenced has...
Will the Trailer Hitch for a 2019 Dodge Challenger Work with Aftermarket Exhaust
hello. i have 140649 borla exhaust installed. will this trailer hitch fit? | In order to install a trailer hitch on a 2019 Dodge Challenger with aftermarket exhaust, the best option we have for you is the Curt Trailer Hitch Receiver part # C13236...
Filter Your Search
Contact and Help