!300M  x   >   Valterra  x   >  

I have a plastic 20 gallon water tank in my rv. I’d like to install a drain in it however I do not have access to the inside of the tank. Do you sell anything that might work? | While we do have drain valves for your RV's fresh water tank, you...

Will this fit into a door that has an integrated screen door inside the exterior door? Can it fit into the screen door’s handle access panel along with the current latch and lock? | The Valterra Deadbolt Lock for RVs # L32CS3008 is designed...

Can you only replace the waste valve with the Vaterra electric valve? Do you have to install the whole assembly, electric valves and drain pipes? | In order to upgrade from manual to electric waste control valves you'll need to change out the...

I noticed the shortest dump valves with cables are 36 inches, is that true ? I really only need them maybe 15 to 20 inches long. Will they be ok if they are bent around in a circle in there because there so long or can they be shortened ? Thanks...

On the Valterra Coupling for Rigid RV Sewer Pipe - 3-1/2inch do I use any lubrication to install on the rigid pipe? Thank you, | You are not required to use any lubrication when installing the Valterra Coupling for Rigid RV Sewer Pipe # F02-2103...

what is the pressure rating of item wo1- 1800 Valterra reinforced hose and is it for potable water | The Valterra Reinforced Hose # W01-1800 referenced in your question features a maximum psi of 150 at 73 degrees Fahrenheit. The hose is indeed...

Do you have 3” MPT 3” long and 4” long | Yes, for a 3 inch long RV sewer nipple with 3 inch MPT ends we have the Valterra # T3503 and for a 4 inch length we have the Valterra # T3504. We do also have thread tape # A05-0265 if needed. Both...

wandering if this water inlet has a built in check valve? | We have check valves like the part # CAM23303 which will fit the 1/2 inch diameter fitting of the Valterra City Water Inlet and Lockable Hatch for RVs # A01-2004VP but it does not come...

What sensors will work on aluminum tanks | The Horst Miracle Probe RV Black Water Tank Sensors # T21301VP can be used on your aluminum holding tank since they have a rubber grommet that isolates the probe from the tank. When you tighten the...

Time to replace the seals on my 1 1/2inch Valterra grey water dump valves. How do I tell if I need new style or old style seals? I have a 2002 Holiday Rambler Alumascape 5th wheel. I can send you some pics if that would help. Thanks... | Go...

This looks like a replacement for the unit in my trailer but I dont understand how it would be possible for the black water flush to possibly contaminate the fresh water system as I have 2 separate hose connections and use 2 separate hoses....

Can you tell me the outside diameter of the inside and outside trim rings ? I have a 2 inch hole to cover in the door. The original one was a square in shape. For a 2000 Rexhall Class A motorhome. Rexhall went out of business 10 years ago. Thanks...

This has ID of 1/2” and 5/8” OD. What pex cinch clamp size for this hose?? 1/2” pex clamps are too small. Will 5/8” cinch clamps fit properly?? | Yes the 5/8 inch pex clamps would be the correct size to use with Valterra Braided PVC Tubing...

I need this but taller do you have it? top of my flange top to bottom is 2-3/4 has 7/8 of threading i need one on the left in photo | I believe I have a solution for you. What you can do is use the LaSalle Bristol Toilet Floor Flange w/ Spigot...

Need a 3/4” brass male to male check valve See you have a male to female. Live nearby and could pick it up. | I went ahead and checked to see what we have, and the closet option I could find to what you're needing is the: -Valterra Check...

Hello, we have a 2015 rpod 171 and both waste valves are cracking on top. The name on the side of the valves is Bristol. It looks like your Valterra T80 system with 3inch and 1 1/2inch pipes. Do you know if this is the correct one ? Is there...

Current LED rope light set is 14 ft length and powered directly by 12v DC wire lead. Color a bluish white. Rope is 1/4inch diameter and ed into spare awning track at the RV wall. What product do I need to replace current set? I plan to directly...

can you tell me the inside diameter of this carrier i need to put hose kit D04-0115 in it thx for any help | The internal diameter of the Valterra part # A04-5094 is 4-3/8 inches. The hose part # D04-0115 that you mentioned has an outer diameter...

Looking for a replacement valve for the spray port connection. I don’t want to replace the entire port just the pvc valve directly behind it. Will the brass JR products valve work? Photos attached of the broken valve for reference. | The RV...

I have a 2015 Montana fifth wheel. It has Valterra 3 inch cable actuated valves. I am looking for new seals and bolts and nuts to rebuild the valves. Would this use the T1003-9VP kit ? Thanks | Yes, for the Valterra Bladex 3 inch waste valves...

Hi. I’m trying to find a replacement fan motor for an Everchill Fridge model WD-282FWDC. Do you or anyone you know sell them? Thanks in advance for your help. | Although we do not offer that exact replacement fan motor for the Everchill Refrigerators...

Do they make a 3 inch bayonet sewer fitting to a 3 inch female screwed fitting? To go from a 3inch female screwed fitting on tote tank to a 3inch bayonet on sewer hose? | I think I'm following you. It sounds like your portable tote tank has...

What do you mean by solvent weldable and how do you install a fill valve into this tank? | The Valterra RV Water Tank # R8042 being solvent weldable simply means that you can glue the fittings onto to the tank using the Valterra ABS Solvent...

Are the 3 fittings that do not go through into the tank for mounting? | The Valterra RV Water Tank # R8042 has 6 ports (3 on each side) to allow for different ways to mount your tank. One hole is already cut out with a red plug but the rest...