!300M  x   >   EZ Connector  x   >  

Hi, Im wondering if this cable is coiled as shown on your pictures, or straight as shown at the EZconnector website? Thanks | The EZ Connector Magnetic Extension Cord w/ 7-Way Trailer Connectors # 319-S7-26 that you referenced comes with coiled...

Hi i am looking at purchasing one of these connectors for my caravan but cannot find the amperage rating for it. My fridge in the van draws 20 amps constantly so i am looking for the specifications on the plug. Any info would be greatly appreciated. Regards...

Since this is a pass-thru and the Curt ECHO Brake Controller is a pass thru will that cause issues? If I understand,I would plug the Curt ECHO into my 7 way and then using this adapter319-R7-51 plug it into the back of the CURT ECHO and then...

Good afternoon, We are getting ready to replace our old F250 with a newer F250 and we use it to tow a Featherlite horse trailer. The trailer uses the magnetic 7 pin connector and we have the female end in the bed of the truck on the left side...

Question about correct pigtail set up for 2011 Toyota Landcruiser | The EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-02 is confirmed to fit your 2011 Toyota Land Cruiser. The trailer connector installs at the back of the vehicle and...

What part number would I need for a plug and play vehicle side connection for my 2022 F450? | The EZ Connector Custom Vehicle Wiring Harness # 319-S7-06 will plug and play with the factory connector on your 2022 Ford F-450 Super Duty. This will...

Im wanting to purchase an EZ Connector adapters for my toy hauler and 2019 Tacoma. Im able to get the trailer adapter, but ez trailer website states the ez connector doesnt work on a 2019 Tacoma. Is there an option I can us for an ez connector,...

Hi. Id like to put an EZ Connector setup on my 2021 Toyota 4Runner and trailer. The 4Runner has the pictured factory original 7 way. This part looks like what I need for the 4Runner see photos. But Im not sure if it will fit in the original...

I want to connect 2 seperate hitch plugs on my trailer a standard 7pin and an ez connector magnetic connector. Will #3375601100 have enough room in the box to bring in 2 plugs to connect to the trailer wiring? | Yes, the Trailer Wiring Junction...

I have 319-R7-52 319-R7-52 Do you sell the round storage holder like the one that came with my 319-R7-07 ? Id like to keep them on the above connectors that will only be used when I pull a buddys drift boat or rent a raft in Montana, while...

do you have this in a 6way version? if not can you just leave a lead unhooked on both ends and still operate? | We do not have a 6-Way vehicle connector but we do have an adapter that will allow you to use one with the EZ Connector Magnetic...

I have an old 83 f250. It has a 7 pin trailer connector on it. The wiring harness behind the connector that sits in the middle of the tail lights to front of the truck is corroded and in need of replacement. I am hoping you have access to this...

I have a Nighthawk Towing hitch and I’d like to convert the plugs to magnetic connectors. I have a 7-way connector on my RV and a 6-pin connector on my Jeep. What would be a setup that would work for my install? | To use a magnetic connector...

I have a 2008 Chevrolet Silverado 3500 HD Cab/chassis with a flat bead installed. My gooseneck ball is located in a square well in the flat bed along with the trailer connection for the electrical. How much clearance is needed for the EZ Connector....

I have a 2013 Toyota Tacoma with a factory installed tow hitch and 7-way light harness. I would like to replace the existing wire harness with a ez magnetic connector for vehicle and trailer connections. Please advise on what to purchase and...

I cannot seem to laocate what I need from Ford Curt, Hopkins, tech?? I have a factory 4 way that is connected through a rectangular connector that also provides tail lights, brake lights etc. I need to install a 7 way for brakes. The truck...

I have a 2021 Silverado 3500 with an in bed trailer factory connector. The connector has both 4 pin and 7 pin connectors. The 4 way is stacked above the 7 way. Will the ez connector 319 S7 06 fit into this housing or do I need to do something...

I have a 2018 GMC 3500 with the dual flap 4-pin/7-pin receptacle for a towing connection. Is this the bracket I need to replace the exiting 7-pin portion of the receptacle plus flap with the EZConnecter receptacle plus its flap your part 319-S7-06?...

I would like to know what I need to make this Item # 319-R7-02 a plug and play installation on a 1994 F150. And what I would need to do a plug and play standard 7 pin receiver | If your 1994 Ford F-150 has a 7-way installed on it already the...

On the EZ connector there are two models that appear to be the same. What is the difference between 319-S7-09 and 319-S7-09D Thank you | The difference between the two EZ Connectors is the trucks they fit. The # 319-S7-09D has the square...

Will this part be plug and play for my 2016 Toyota Tundra. I am planning on leaving my factory installed 7 way/4 way plug in place and add the EZ connector below my rear bumper. Do you know if the factory towing harness can be unplugged from...

Im looking to replace the factory installed brake controller in my 2020 Tundra. I dont see any aftermarket options ta fit the tundra later than 2019. What are my options? | I have a solution for you but there is a computer issue with the...

Vehicle- 2012 Ford Expedition EL Trailer- 2010 Interstate 16 foot enclosed I currently have the Adapter 4-Pole to 7-Pole and 4-Pole - 37185inch installed. I want to convert my 16 foot enclosed trailer and vehicle to the EZ Connector Magnetic...

I am planning to switch my set up to use the EZ Connector 7 pin wiring. I have found the propper part that will let me as the receptive to the bed by tapping into the wiring for the 7 pin connector already in my bumper. The part that I am asking...