!300M  x   >   Nissan  x   >  

I am looking for a replacement vent lid. Made Ventline AS-13M replacement No.VB0568. | We offer two replacement covers for the Ventline AS-13-M-V101. We have a white cover # BV0554-01 and a smoked color # BV0554-03. |

Which ladder rack will work 2016 Nissan Frontier with unirail installed? Crew Cab. I do not want to remove unirail. | I highly recommend looking into the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks # Y01151-5868....

Vehicle: 2016 Nissan Versa Standard Transmission I already have a basic Stowmaster 5000 tow bar. My question... is this bar compatible with the 52357-4A base plate kit or is there additional adaptation required? Thanks for your help! | Yes,...

Is the axxera av615bhm still available? | It is not, however we do have the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl, # JWM60A. This Double-DIN stereo plays audio from radio signals, CDs, DVDs, and devices connected through...

Is this Bluetooth compatible with a Flagstaff E Pro 15tb? I was given one by the dealer. It worked great the first 2 times out. Now it is giving me a warning that breakers are not engaged and it is a wiring issue. Any information will help. I...

does the kuat nv2.0 base have the same articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need as the kuat nv2.0? | Yes the Kuat NV Base part # BA22B has the exact same cradles and...

I bought the C56226 kit for my Frontier. How do I get 12 volt out on the 7 pin ? Add a fuse or relay ? | Thanks for the purchase of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # C56226 for your...

I see that the Draw-Tite 1 1/4inch hitch 36542 is confirmed as a fit for a 2011 Nissan Rogue for use with the Saris Freedom 2-bike rack SA4412B. I saw this in a QandA on your website. Would that hitch also work for a 2014 Nissan Rogue for use...

I had a hitch put on with wiring. The brake lights dont work. I brought back today and the dont know why. Im ordering the installation kit and wanted to know if this includes the directions on how and where to install the relays. thanks | The...

Will this hitch fit my nissan altima sv 2017 | We have trailer hitches that fit your 2017 Nissan Altima like the Draw Tite part # 24796 but the Ultra Fab you mentioned is not for vehicles and instead is a multifit hitch for RV applications....

Can we get front timbrens only ...??? | Yes. There are Timbren SES available for the front axle of your 2018 Nissan Titan xD using part # TFXF1004A. This Timbren kit is designed for Nissan Titan xD's with heavy off-road front bumpers or snow...

I have an 2016 nissan pathfinder whitch has a tow mode. do I need the whole wiring harness ? | If the vehicle doesn't already have a trailer connector, you'd need the # C56281 to add a 4 pole or # 118273 to add a 7-way. If the trailer you're...

Will this fit onto a 2006 Nissan Pathfinder without any modifications to the factory support bars | The Rola Roof Mounted Cargo Basket, part # 59504 will work with your 2006 Nissan Pathfinder providing that the cross bars on the OEM roof rack...

For my 2018 pathfinder using the 118273 wiring harness-will the 7 blade provide a charge for the trailer battery while driving? | A 7-way such as the T-One Vehicle Wiring Harness - 7-Way Trailer Connector # 118273 that fits your 2018 Nissan...

We were looking on your website and we are not sure which to purchase we need to carry 2 kayaks on a 2017 Nissan Armada that has no crossbars just roof rack. 1 12ft Ascend widest width in middle is 31 and total weight is 77lbs and 1 13ft Ascend...

looking to buy both a hitch and cargo carrier from you but I have several questions/requirements. Wasnt sure I could speak to you directly about recommendations so here goes: 1. Vehicle 2015 Nissan Murano 2. Carrier must: fold up, have mesh...

Which hitch will accommodate a 1 1/4inch receiver with little or no damage to the vehicles fairing on the SR model. I do not wish to cut any of the trim on the car | The Curt trailer hitch # C11378 is listed as a fit for all models of the 2015...

Im trying to estimate the rise Ill need to match my trailer about 16inch at the coupler so that I can order the hitch together with the right euro-style ball/drawbar, to save time and shipping cost. | The Curt Trailer Hitch Receiver part # C12122...

Will the rectangular T-bolts on this mount also slide into my Rhino Rack Aerobar Channels? | Yes, I spoke with Rhino Rack and they confirmed that the Hi-Lift Jack Holder Brackets for Rhino-Rack Pioneer Platform Rack # RR43219 would fit into...

do the grease zirk fittings come with the axel? | Yes, the spindles of the Dexter Trailer Idler Axle Beam # T20BTR-EZ-6048 are EZ lube spindles so it comes with the zerk fitting installed already. |

I have a 2 inch receiver and need a 5 inch rise to meet my boat trailer. I will be boat/motor/trailer 2000 lbs. | We have numerous ball mounts that offer at or around 5 inches of rise! For a basic ball mount with a 5 inch rise you can use Curt...

I have a 2017 nissan titan sv crew cab rear wheel drive with a 6.5 bed.I have a e2 wds with round sway control installed but I still get sway when I get around 60 mph.What can I do to eliminate sway when traveling at 75 mphs. | The first thing...

I have a 2007 Nissano Murano SE with only a hitch and no existing wiring. I will be pulling a 2002 KZ Coyote 16c with a weight of around 2800lbs and has a 7way round connection. Do I need to T in a 4 way flat harness then convert it to 7 way...

Just purchase a Lance 1985 dual axle camper. Towing behind a 2018 Titan XD with V8 Getting some major sway problems when passed by large simi trucks. Will this hitch help or do you have a better suggestion? Thanks, Gross Dry Weight 4245...