Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer...
More Information >Trailer Lights Specs:
Features:
...6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-exist...
More Information >Trailer Lights Specs:
Features:
...power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes...
More Information >Trailer Lights Specs:
Features:
...Trailer light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibra...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount
More Information >
Trailer Lights Specs:
Features:
...Diodes: 1 Power draw at 12.8 volts: 0.054 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat...
More Information >Trailer Lights Specs:
Features:
...span>mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using ...
More Information >Trailer Lights Specs:
Features:
...Light angles down to illuminate your trailer's license plate Incandescent bulb is replacable Durable, chrome-plated steel housing Clear polycarbonate lens Surface mount to tra...
More Information >Trailer Lights Specs:
Features:
...lead length: 6" Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a s...
More Information >Trailer Lights Specs:
Features:
...over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 2-5/8" wi...
More Information >Trailer Lights Specs:
Features:
...on center): 3-1/4" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These li...
More Information >Trailer Lights Specs:
Features:
...systems Surface mount to trailer with mounting bracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide ...
More Information >Trailer Lights Specs:
Features:
...Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small...
More Information >Trailer Lights Specs:
Features:
...Gray-coated license-plate light Surface mount Mounting hardware and adhesive not included Single-wire design Replaceable bulb Uses replaceable bulb #168 2-5/8" Long...
More Information >Trailer Lights Specs:
Features:
...The bulb is protected in the housing and can be easily replaced. The base surface mounts on 2" centers. The light contains a single lead wire for power and is grounded through the mounting hardw...
More Information >Trailer Lights Specs:
Features:
...replaced Durable chrome-plated brass construction Clear lens over incandescent bulb Compatible with 12V DC systems Snap-in mounting - light easily clips into 1-1/4" diameter mounting hole Single ...
More Information >Trailer Lights Specs:
Features:
...Compatible with 12V DC systems Stud mount to trailer - hardware not included Single wire design grounds through mounting hardware Specs: Dimensions: 4" long x 1-3/4" wide x 2-5/...
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are…
view full answer...National seal 472920 has an inner diameter of 2.25 inches and outer diameter of 3.375. For a replacement, you will want Grease Seal - Double Lip #GS-2250DL or oil seal #10-63.
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The first thing to do is disconnect the trailer from the Liberty. Then using a circuit tester, like part #PTW2993, test each pin of the 4-Way. Clip the alligator clip of the circuit tester to the exposed post, the ground wire. Check each pin with…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...The Bolt hitch lock part #BL7023582 that you referenced does fit your 2014 GMC Sierra 1500. I attached a chart that has all of the vehicle this works with. I also attached a link to a review video for this lock for you to check out as well.
view full answer...Yes, the Bolt Trailer Hitch Lock part #BL7023582 will work for you as it is a hitch lock designed for 2-1/2 inch hitches like what you have on your GMC 3500 truck. The usable portion of this lock is 3.55 inches. Check out the picture I attached for…
view full answer...I checked directly with BOLT for you, and they confirmed for me that your 2021 Chevy Silverado is absolutely compatible with their trailer hitch locks. Take a look at the accompanying photo, and if you have the same center cut key, the correct lock…
view full answer...The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…
view full answer...