2014 Jeep Grand Cherokee Roof Rack

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

There should be no metal strip on top of the flush mount side rails, only black plastic

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Lightweight aluminum crossbars and vacuum cups create a roof rack for your vehicle with a naked roof. Durable, round bars install in seconds and work with most clamp-on accessories. Removes quickly for storage in your trunk when not in use.

Features:

Lightweight aluminum crossbars and vacuum cups create a roof rack for your vehicle with a naked roof. Durable, round bars install in seconds and work with most clamp-on accessories. Removes quickly for storage in your trunk when not in use.

Features:

Lightweight aluminum crossbars and vacuum cups create a roof rack for your vehicle with a naked roof. Durable, round bars install in seconds and work with most clamp-on accessories. Removes quickly for storage in your trunk when not in use.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side