Radiator Fans Specs:
Radiator Fans Specs:
Radiator Fans Specs:
Radiator Fans Specs:
Features:
26-1/4" x 15-1/2" x 2-5/8". Dual S-blade, shrouded, 12V nylon puller fan with speed controller helps provide consistent cooling. Draws power from the electrical system, freeing the engine belt for improved performance and fuel economy.
More Information >Videos
for Radiator Fans
Help Articles
for Radiator Fans
Expert Answers
for Radiator Fans
I went out to the warehouse and measured the total depth of the shroud for the Derale #D16925 at 1-1/2". To use this as a puller fan you would reverse polarity and would need to use a custom shroud, as the included fan has to many openings to be…
view full answer...While the Derale 12" High-Output, Electric Radiator Fan #D16925 is intended to be a pusher fan only unless a custom shroud is made you could reverse the direction of the fan if you reversed the polarity.
view full answer...I spoke with my contact at Derale and he informed me that a Derale 12 inch High-Output, Electric, Single Radiator Fan #D16925 can withstand air temperatures of up to 300 degrees and is 12 inches in diameter. Based on everything you need I think this…
view full answer...Hello Bob. We do have a good gas detector option for you, but the lp gas detector model 7719 is currently unavailable. What I recommend instead is the RV Propane Gas Detector #RS44FR. This is a pretty standard gas detector. Just keep in mind the…
view full answer...Several hitches, both Class III and Class IV types, are offered for the different versions of the 1999 full-size Dodge van. The key factor in selecting the right one is the type of bumper on the van, either a standard bumper or a step bumper. The…
view full answer...Hey Timothy, I reached out to my contact at Thetford and they said you need one of the following parts: - 42067 KIT, PEDAL HIGH WHITE STYLE II - 42078 KIT PEDAL LOW WHITE STYLE II These are made to order so you'll have to get it through them…
view full answer...Electric fans do improve fuel mileage and power since they allow the accessory belt drive to turn with less resistance. I did the same conversion on an older Camaro years ago and it cooled better, improved mileage, and power. You'll have to…
view full answer...The Flex-A-Lite radiator fan part #FLX295 is the correct size and is a fit for your 2004 Toyota Sequoia but it is not an OEM replacement so it does not use the exact same mounting points of old fan. You will have to use the included mounting hardware…
view full answer...The correct replacement control module for your Kwikee Series 32 Steps is the Lippert Components Kwikee Control Unit part #LC379606. The motor you'd need is the part #LC379147, and the linkage the A linkage part #LC379160. If you needed all of…
view full answer...You can install a stack cooler in your vehicle. The Class ratings are there as a reference point to a hitch Class. For example if someone has a Class III hitch they can look at coolers, see a Class III and say, hey, I have a Class III hitch so this…
view full answer...The Flex-a-lite 15" Black Magic Xtreme S-blade Fan w/ Thermostat Controller - 24V - Reversible #FLX18024 is sold as a fan assembly with motor and thermostat, but does not come with any mounting hardware as the installation will vary across…
view full answer...We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…
view full answer...Filters
- 4 results