Replacement Needed for the Titan Hub T1721400042
Updated 08/30/2021 | Published 08/28/2021
Products Featured in This Question
Question:
i need to know availability for #T17214000247 . I would like to buy the hub complete with inner bearing LM67048 and outer bearing LM11949. Thank you for any help you can possibly give
asked by: Bryan
Expert Reply:
I have a potential alternate option, but unfortunately, the Titan Trailer Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Cast T1721400042 is no longer available from the manufacturer. As this uses an uncommon combination of inner and outer bearings, I recommend replacing the axle with a more common set up.
With that said, the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # 35545I-ST-89 will come with idler hubs and includes all bearings, seals, caps, and even grease. However, you will need to very a few measurements to make sure something like this will fit your trailer. This will measure 89 inches from hub face to hub face and then 74 inches from center to center of the spring seats.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: t1721400042
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Q&A: Replacement Hub for Trailer With Timken 158123 Inner and 09067 Outer Bearing
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 452920/482920
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Q&A: Replacement Hub Assembly with 15123 Inner Bearing and 09067 Outer Bearing
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
- Q&A: Replacement For Titan Trailer Hub 17214
- Search Results: 168233
- Q&A: Replacement LM11949 Bearing and LM11910 Race Needed
- Q&A: Trailer Hub With 1.25 Inch Inner Bearing & 0.75 Inch Outer Bearing