Can Timbren Axle-Less Suspension System Work With Off-Road Tires?
Question:
I would like to know which brake assembly works with 84546UC3-EZ Hub/Drum Assembly Which castor/wheel assembly works with the Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2 Lift - 2,000 lbs
asked by: James S
Helpful Expert Reply:
There is a 2,000 lb capacity Timbren Axle-Less Suspension with 4" Drop Spindle # ASR2KHDS09, though not a 1,200 lb one. I am not certain what you are referring to in terms of "strong enough" but it will work with 3,500 lb rated hub and drum assemblies # 84546UC3-EZ as well as 3,500 lb brakes. If you were referring to your trailer being strong enough, if you do not have a crossmember above where you want to install the Timbren one will need to be added, or you can reinforce your trailer's frame by adding standard, 2-inch-square steel tubing using the built-in square holes on the pair of units.
The system was designed to be used with off-road tires; I've added a link to a video review of this system for you to take a look at.
Products Referenced in This Question
Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Trailer Jack
- Utility Trailer
- A-Frame Jack
- Standard Grade
- 1001 - 2000 lbs
- Manual Jack
- 28 Inch Lift
- Bolt-On
- Weld-On
- With Rectangle Foot
- Ultimate Jack
more information >
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- ABS Fasteners
more information >
Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How Much Distance Should I Have Between The Tire And The Trailer Frame?
- Q&A: Dimensions of the Timbren Axle-Less system part # A12RS440
- Q&A: What Measurements are Needed to Find the Correct Dexter E-Z Flex Equalizers for a Trailer
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Q&A: Recommended Suspension for 5x8 Northern Tool Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Setting Up A Utility Trailer For the Timbren Axle-less System
- Q&A: Load Weight Capacity of Universal Fit Timbren Axle-Less Trailer Suspension Systems
- Article: Where to Position the Trailer Axle?
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Choose a Trailer Hitch Coupler
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Article: Rooftop Cargo Carriers
James
11/17/2017
I would like to know which brake assembly works with 84546UC3-EZ Hub/Drum Assembly Which castor/wheel assembly works with the Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2 Lift - 2,000 lbs