Using Dexter Over-Under Axle Conversion Kit on 1968 Starcaft Pop-Up To Increase Ride Height

Updated 12/03/2014 | Published 12/02/2014

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(821)

$96.56

Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole

(22)

$34.54

Dexter Trailer Springs Over-Under Conversion Kit

(821)

$86.84

Question:

i am seeking a means to make the ride height taller for my 1968 starcraft pop up camper. at least to the height of my standard height fullsize dodge pick up. is their a kit for this height or to give me some clearance. thank you

asked by: Eric S

Expert Reply:

If your springs are currently mounted to the underside of the axle, you can gain some additional height by using an Over-Under Conversion Kit, part # K71-385-00 for a 3 inch diameter axle or # K71-384-00 for a 2-3/8 inch diameter axle. The kit will allow you to relocate the springs so they're mounted to the top of the axle which will gain you about the diameter of the axle in height.

If your axle isn't 2-3/8 or 3 inches in diameter, you can gain a small amount of suspension height by going with taller spring hangers. The tallest ones we offer are 5-7/16 inch tall, part # 115919. Keep in mind that due to the flex in your springs and the articulation provided by the shackle links, your height increase won't equal the height difference between the new hangers and your old ones. Please also realize that increasing your ride height changes the suspension geometry, which can make the trailer top heavy and more susceptible to trailer sway.

expert reply by: Mike L