How to Pick Out the Correct Replacement Seal for a Trailer Hub
Updated 11/17/2014 | Published 11/16/2014
Question:
I am looking for a replacement grease seal. The seal has a number on it TCM 174253 TB. The inner bearing is L68149 and outer is L44649. I think I need the 10-19 seal can you confirm. Thank you,
asked by: Randy L
Expert Reply:
The grease seal number you referenced doesn't cross reference with anything we offer but based on the bearing numbers you listed you would need the # RG06-050. To verify this you would want to measure the inner and outer diameter of the current seal you have. If the inner diameter is 1.719 inches and the outer diameter is 2.565 the # RG06-050 would be the correct seal. You will need a digital or dial caliper for this measurement.
Or if it is damaged you will need to measure where the seal rides on the spindle and the inner diameter of the hub where the seal is, see picture.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Q&A: Key Replacement for Lippert Components RV Lock Core # LC213116
- Q&A: Compatible Compartment Door Cam Locks Available
- Shop: Spare Tire Cover
- Shop: Adco Spare Tire Cover for 29" Diameter Tires - Diamond Plate - Qty 1
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Camco Vinyl Spare Tire Cover - 29" Diameter - Arctic White
- Q&A: Trailer Hub Grease Seal with Inner Diameter of 1.719 inch
- Q&A: Recommended White Spare Tire Cover for 29 Inch Tire
- Q&A: Replacement Grease Seal for Lippert 4400 lb Axle
- Q&A: Spare Tire Covers For a 235/75R15 Jeep TJ Wheel and Tire
- Q&A: Is Sealant Needed When Replacing Grease Seals and Dust Caps