Difference of 4-Way Trailer Connector with 4 Wires Compared to 4-Way with 5 Wires
Updated 08/18/2014 | Published 08/16/2014
Products Featured in This Question
Question:
4-Pole Trailer End Connector
asked by: Janet W
0
Expert Reply:
The 4-Pole Trailer End Connector # 18004 is meant as a replacement for a trailer side 4-Way connector that has been damaged. That is why it is so short at 12 inches long. This is a standard 4-Way with one white ground wire, one brown running light wire, one yellow left turn/brake light wire, and one green right turn/brake light wire.
If the one you are replacing has 2 running light wires then you would want a wishbone harness, # W002230. I have included video reviews of both harnesses for you.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Wiring New 4-Way Connector on Trailer with 5 Wires
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Availaiblity of White Half Moon Trailer Vent
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Q&A: What Size Socket Does the Dexter Dual Trailer Wheel Lug Nut with Swivel-Flange Use
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2014-2015 GMC Terrain
- Q&A: How To Wire LED Trailer License Plate Light For Cargo Carrier To A 4 Way Flat
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Screws Needed To Attach 5/8" Treated Plywood To Aluminum Snowmobile Trailer Frame
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers