Turn Signals Do Not Work After Installing Trailer Wiring Harness on 2010 Nissan Xterra

Updated 08/05/2014 | Published 08/03/2014

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(472)

$55.83

Curt Relay Kit for Nissan Armada or Titan Aftermarket Tow Package

(158)

$31.44

Question:

Ive got a 2010 nissan xterra x I bought the harness kit with the relays and everything I installed the kit as the instructions said and I hooked it up to my trailer and I just have power to the running lights , no turning signals, I went and opened my fuse box under the hood and I do not have the relays for the left and right trailer turn signals, so I took the relays that came with the kit just as trial and error and plugged them in at my fuse box and I have turning signals now but no running lights , so my question is will everything work if I was to get 2 more of the relays that came with the kit and installed them in the fusebox aswell as having the other 2 relays plugged into the harness kit ? If so do you sell the relays ?

asked by: Jacob W

Expert Reply:

This is strange because you should only need the 3 relays that came with harness # C56225 for the 2010 Nissan Xterra. But it sounds like you do need additional relays (there also might be one needed in the fuse panel in the cab). We do have the relays, in the Curt Relay Kit # C57000. It contains 2 of the smaller blue relays and one larger brown one.

expert reply by: Michael H