bing tracking image
Q & A Icon

What Grease Seals Do I need For A Dexter Model P-16 Scissor Trailer?  

Updated 11/18/2026 | Published 11/16/2026

Question:

Which replacement grease seals are needed for Dexter Model P-16 scissor trailer? Ser. D 7956407 Has 5.30-12 Wheels. Thx

0

Expert Reply:

Hey Jon, thanks for reaching out. The Dexter Model P-16 is an older trailer, and unfortunately, it isn't possible to identify the exact grease seal size using the serial number. The 5.30-12 tire size doesn't tell us which seals are installed in the hubs either.

If you can provide me with the casting number from your hub, I might be able to use that to look up your seal info. Brake drums should have a part number cast right on the front, while idler hubs should have a number on the back of the hub. If you can't find those numbers, you can pull a hub, remove the seal and measure the ID and OD with a micrometer.

Are you needing just seals, or do you need to replace your bearings as well?

expert reply by:
0
Jesse M
Nick C. profile picture

Nick C.

11/17/2026

I got the wrong ones twice. Best to take off the old ones. and measure and get replacements at etrailer.

Jesse M. profile picture
Etrailer Expert

Jesse M.

11/18/2026

@NickC Yep, that's definitely the way to do it!
Toml profile picture

Toml

11/17/2026

I've used these seals on a Scamp trailer with a Dexter axle. Yes, best to remove and check specs. This is a common size for small trailers and they have worked well for me.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>