bing tracking image
Q & A Icon

Can You Use Stacked Washers to Install a Roadmaster Tow Defender with a Blue Ox Avail Tow Bar?  

Updated 11/09/2026 | Published 11/04/2026

Question:

I have the Blue Ox Avail bx7420 and Im installing the RM tow defender. When I bolt the back tow defender bracket on to the blue ox I had to use the longer bolt to get the plate and washers on. The problem is, I have to put 5 washers under the plate to lift it high enough so the shock boots dont drag on bottom of plate. Is it fine to place 5 washers between the plate and bracket of the blue ox? Thank you

0

Expert Reply:

Hey Randy!

Welcome back to etrailer, and thanks for reaching out!

In theory, there's nothing wrong with using a longer bolt and washers to connect your Roadmaster Tow Defender # RM-4750 to your Blue Ox Avail # BLU28QV, but there are a few things I'd be careful about with your setup.

First, you're absolutely right to be concerned about the shock boots rubbing against the bottom of the plate. You definitely don't want that happening, since the constant rubbing could eventually wear through the boots and expose the tow bar's moving components to dirt and moisture.

As for using five washers to raise the plate, that's where I'd be a little hesitant. It's not necessarily that five washers are automatically unsafe, but stacking that many creates a taller mounting point that could introduce some movement or put additional stress on the bolt. With all the vibration and movement that happens while flat towing, I'd be concerned about the hardware eventually loosening.

The longer bolt itself isn't necessarily an issue, either, provided it's the correct diameter, strength, and length for the application. Roadmaster includes different bolt lengths with the Tow Defender for different installations, so if you're using one of those, that's a good starting point.

What I'd recommend is trying to get the clearance you need with fewer spacers, ideally using a properly sized solid spacer rather than stacking individual washers. However, before making that modification, I'd want Roadmaster to confirm that the spacer arrangement and longer bolt are acceptable for your Avail. I wouldn't recommend towing with the five stacked washers until we have that confirmation.

If you can, please send me a couple of photos showing how you've mounted the brackets and where the boots are making contact. I'd be happy to take a closer look and see if there's another way to get the clearance you need without stacking so many washers.

I also see your previous order was for a Ford F-53 chassis. What kind of motorhome do you have, and what vehicle are you flat towing behind it?

expert reply by:
0
Jerry B
Randy C. profile picture

Randy C.

11/5/2026

Hi Jerry Thank you for getting back to me. I have a 2017 Tiffin 36ua and I flat tow a 2024 Jeep Wrangler that is stock. I used 3" grade 8 bolts with the washers. I can't seem to attach pictures. Thank you Randy C.

Jerry B. profile picture
Etrailer Expert

Jerry B.

11/9/2026

@RandyC You're not able to add photos to the comments (yet, but I think that's coming soon), but you're welcome to email them to me! I do think you're perfectly fine to use the bolts and washers, though for an official confirmation, I can reach out to Roadmaster just to be safe.
Randy profile picture

Randy

11/9/2026

Hi Jerry I did email photos of the washers and bolts I used.
Gerald T. profile picture

Gerald T.

11/8/2026

I used the next larger nut (so it slides over the 3" long bolts with a washer above and below) to take up the gap. Then I can tension the brackets on the ends of the tow arms with the locknuts on the bolts. Let me know if you'd like pictures of my setup.

Randy profile picture

Randy

11/9/2026

@GeraldT I think I accomplished the same as you with using 5 washers. Love to see a picture of your set up. Thank you Randy [email protected]

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>