bing tracking image
Q & A Icon

Will the Tie Down Bow Roller Assembly Fit a 3 Inch Wide Boat Trailer Bracket?  

Published 11/04/2026

Question:

I've got an older boat trailer, and the bow roller is getting pretty worn out. It's starting to leave marks on the front of my boat, so I figured it's time to replace it before the next trip to the lake. I found the Tie Down Bow Roller Assembly and it looks pretty close to what I have now. My trailer has a 3 inch wide bracket, but I'm wondering if this assembly comes ready to install or if I'll need to reuse the shaft from my old roller. Is there anything else I should measure before ordering?

0

Expert Reply:

Hey Brandon! The Tie Down Bow Roller Assembly # TD83VR is designed for a 3 inch wide bracket and uses a 1/2 inch shaft, so you're looking at the right setup if those measurements match your trailer. The roller is made from yellow PVC, which gives the bow of your boat a surface to rest against instead of rubbing on the metal bracket. And since your old roller is already leaving marks, I'd definitely want to get that taken care of before it causes any more trouble.

Before ordering, I'd double check the distance between the inside edges of your bracket and the diameter of your existing shaft. You'll want that 3 inch bracket width and 1/2 inch shaft size to match. I also wouldn't assume the mounting shaft is included without confirming the package contents, so hang on to your existing hardware for now.

Do you happen to know if your current roller uses a 1/2 inch shaft?

expert reply by:
0
Heather A

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>