Replacement Spring Bar and Head Recommendation for 1,200 lb Draw Tite Weight Distribution
Updated 05/24/2017 | Published 05/22/2017 >
Question:
I have an older Draw-tite hitch head that has 06623-099 on the bottom left of the label and v5 on the bottom right. Is there a replacement head that I could purchase to use my existing spring bars? The bars are 1200#, and I have a dual cam sway system installed as well. I would rather not have to replace the whole system, and just the head if at all possible. I know this system is obsolete, but didnt know if a new head could accommodate the existing bars or not. Thanks.
asked by: Tim C
Expert Reply:
I wish we had replacement parts that would work, but the bars you have aren't compatible with the current bar designs made so it's going to come down to you replacing the head and the bars.
So for bars you would need the part # RP66009 which has the 1,200 lb capacity you need and then for a head you would want the part # RP58167.
Continue Researching
- Search Results: hitch silencer
- Search Results: stoltz
- Search Results: bunk carpet
- Search Results: bow safety chain
- Search Results: bolster
- Search Results: bunk roller
- Search Results: swing tongue
- Shop: Tie Down Bow Roller Assembly for 3" Wide Bracket - PVC - 1/2" Shaft - Yellow
- Shop: Trailer Hitch
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop - Drum - 2-5/16" Ball - Bolt On - 12,500 lbs
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs
- Shop: Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Black - 2-5/16" Ball - 21K
- Shop: CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide
- Video: Review of BulletProof Hitches Weight Distribution Hitch - WD System With Sway Control - BPH46VR
- Shop: Demco Surge Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 12.5K
- Video: Review of Gen-Y Hitch Flat Mount Trailer Coupler - Black Flat Plate Mount Coupler 2-5/16 In - GY93AV
- Shop: etrailer Hydraulic Trailer Brakes - Free Backing - E-Coat - 12" - Left/Right - 5.2K to 7K
- Q&A: Compatibility of Resse Shank 54970 With Trunnion Bars 54946 and Hitch Head With Patent 5375867
- Video: DIY Install: Timbren Rear Suspension Enhancement System on your 2017 Jeep Wrangler Unlimited
- Video: Installation of the Timbren Rear Suspension Enhancement System on a 2024 Jeep Wrangler Unlimited
- Video: A Closer Look at the Demco Cast Black Trailer Coupler with Adjustable Channel and eZ-Latch
- Q&A: Is it Safe To Use a 2-1/2 to 2 Inch Reducer Sleeve With a Weight Distribution Trailer Hitch?
- Q&A: How Low Does The B&W Continuum Weight Distribution System Hang Below The Trailer?
- Q&A: Are Replacement Trunnion Bars 22210 Available For Reese Weight Distribution System
- Q&A: Overall Length of the Replacement Trunnion Spring Bar Part # RP22225
- Shop: Towing Mirrors
- Q&A: Availability of Replacement 22210E Spring Bar on Reese Weight Distribution System
- Q&A: Can 800 lb Reese Trunnion Bar Work in Place of 600 lb Draw-Tite Trunnion Bar
- Video: Comprehensive Review: Reese Weight Distribution
- Video: The Quietest Weight Distribution Hitch Ever? B&W Continuum Interview + Breakdown