bing tracking image
Q & A Icon

Replacement Leaf Springs for Boat Trailer  

Published 11/02/2026

Question:

My boat trailer is old the spring from eyelet to eyelet is 35 inch the spring has 6 leaves all I have on the trailer is a 16 foot john boat with a 25HP Merc. Any suggestion on reducing springs? I jst ought a 2000 lb axle from etrailer.

0

Expert Reply:

Welcome back Bernie. For replacement leaf springs to pair with the Trailer Axle with Idler Hubs # e84YR you recently purchased, you'll want springs rated for a 2,000 lbs axle, such as the 4-Leaf Double-Eye Spring # e77SR. Based on the information you provided and the quantities from your previous order, it sounds like you have a single axle trailer with double-eye leaf springs.

One thing I wanted to double check before recommending a specific spring is the 35" eye to eye measurement you mentioned. That's significantly longer than any of the double eye leaf springs we currently carry, so I'm wondering if that measurement may have been taken a little differently. For double eye springs, you'll want to measure from the center of one spring eye to the center of the other with the trailer jacked up so the weight is off the suspension. It's also worth mentioning that leaf springs can flatten and become longer as they wear, so if your existing springs are older, we'll need to account for that when selecting replacements.

I've included a help article below that walks through a couple of different ways to measure your existing springs.

Do you have a single axle setup with double eye springs?

expert reply by:
0
Christopher H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>