Best Recommended Way to Convert Alliance Paradigm 2025 385FL to Disc Brakes

Updated 10/21/2026 | Published 10/20/2026

Question:

I have an Alliance Paradigm 2025 385FL and would like to know the disc brake kit that will be compatible with it.

asked by: Ilka D

Expert Reply:

Hey Ilka, I looked up the axle capacity and wheel bolt pattern of your Alliance Paradigm 2025 385FL and the correct disc brake kit is the DeeMax part # DE66AR that you referenced. This comes with everything you will need to convert Alliance over to electric over hydraulic including the best disc brake components and the best actuator around so you'll be very happy with this setup as well as very impressed with how much better the brakes work. Have you made any other modifications your Alliance yet?

expert reply by: Jameson C

Ilka J.

10/21/2026

I have just change from 5th Wheel to goose neck with the Reese 94920 Goose Box. I am very interested in doing the upgrade for the disc brake system.

Jameson C.

10/21/2026

@IlkaJ You will really like the disc brakes over the drum setup you have now for sure. The stopping power and better control will be noticeably better.

Jeff

10/21/2026

I installed the DEE Max disk brake kit on my 2025 Brinkley Z3100 and am very pleased with the results! I did the work myself, so if you are confident in your ability and have had some brake / hub experience you should be able to do the same. The braking power is vastly improved over the stock drum brakes!

Jameson C.

10/21/2026

@Jeff great to hear! Yeah it's a game changer!

Joe T.

10/21/2026

The DeeMax kit was awesome. Easy to install. Routing the brake hose was the hardest part. Make sure you have 3-4 big bottles of Dot 4 brake fluid and several large (regular) size high temp grease for the bearings. The braking difference between the disc over my old drum brakes, there's NO comparison. Well worth the money. Just call etrailer with your axle #"s and manufacture. Also when you get to bleeding the lines, DO NOT leave the"break switch key " pulled. The switch will overheat and melt. ?? Never guess how I know.

Jameson C.

10/21/2026

@JoeT good advice and thanks for the feedback!

Marvin

10/21/2026

Recently put this kit on my Voltage V3600. Did all but bleeding brakes alone. Took about 10 or 12 hours with some interruptions. Kit was complete and easy to install. Braking is greatly improved and stays much cooler.

Jameson C.

10/21/2026

@Marvin great to hear! Glad it's working better for you!

Tim A.

10/21/2026

It’s one of the best kits you can buy! Easy to convert…. You will be extremely pleased with this system, especially if you have dealt with electric brakes a lot. You will never go back to electric.