Trailer Hub with 5 on 4-1/2 inch Bolt Pattern that has Bearing Numbers L68149
Published 09/29/2026
Question:
I am wanting to replace a 5x4.75 single axle trailer hub to a 5x4.5 trailer hub. My inner and outer bearings are L68149 and L44610, what hub assembly am I going to need?
asked by: Jesse E
0
Trailer Bearing
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Jesse, based on the bearings you have in your current hubs to convert to a 5 on 4-1/2 inch bolt pattern you will need the Dexter part # DX45BR. What trailer do you have?
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 4,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L68149
- Marine Grade
- For 4200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Do You Have a 2-inch Square Axle Rated for At Least 3,000lbs and Has Idler Hubs?
- Q&A: Looking To Replace Tie Down Engineering Brake Pads And Rotors
- Q&A: Replacement for Shelby 5101 Coupler
- Q&A: Correct Replacement for Shelby 5101 A-Frame Trailer Coupler
- Q&A: What Will Cause Excessive Wear on the Outside of the Tire on a Single Axle Cargo Trailer
- Q&A: Troubleshooting Trailer Tire Wear on the Outside Edge of the Tire
- Q&A: Recommended Non-Brake Replacement for Dexter 8-243 Hub/Drum
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)